End-of-Life (EoL)
A Security policy can include specification of a Vulnerability Protection profile that determines the level of protection against buffer overflows, illegal code execution, and other attempts to exploit system vulnerabilities. There are two predefined profiles available for the Vulnerability Protection feature:
The default profile applies the default action to all client and server critical, high, and medium severity vulnerabilities. It does not detect low and informational vulnerability protection events. The strict profile applies the block response to all client and server critical, high and medium severity spyware events and uses the default action for low and informational vulnerability protection events.
Customized profiles can be used to minimize vulnerability checking for traffic between trusted security zones, and to maximize protection for traffic received from untrusted zones, such as the Internet, as well as the traffic sent to highly sensitive destinations, such as server farms. To apply Vulnerability Protection profiles to Security policies, refer to Policies > Security.
The Rules settings specify collections of signatures to enable, as well as actions to be taken when a signature within a collection is triggered.
The Exceptions settings allows you to change the response to a specific signature. For example, you can block all packets that match a signature, except for the selected one, which generates an alert. The Exception tab supports filtering functions.
The Vulnerability Protection page presents a default set of columns. Additional columns of information are available by using the column chooser. Click the arrow to the right of a column header and select the columns from the Columns sub-menu.
The following tables describe the Vulnerability Protection profile settings.
Vulnerability Protection Profile Setting Description
Name Enter a profile name (up to 31 characters). This name appears in the list of Vulnerability Protection profiles when defining security policies. The name is case-sensitive and must be unique. Use only letters, numbers, spaces, hyphens, periods, and underscores.
Description Enter a description for the profile (up to 255 characters).
Shared Select this option if you want the profile to be available to: Every virtual system (vsys) on a multi-vsys firewall. If you clear this selection, the profile will be available only to the Virtual System selected in the Objects tab. Every device group on Panorama. If you clear this selection, the profile will be available only to the Device Group selected in the Objects tab.
Disable override ( Panorama only ) Select this option if you want to prevent administrators from creating local copies of the profile in descendant device groups by overriding its inherited values. This selection is cleared by default, which means overriding is enabled.
Rules Tab
Rule Name Specify a name to identify the rule.
Threat Name Specify a text string to match. The firewall applies a collection of signatures to the rule by searching signature names for this text string.
Action Choose the action to take when the rule is triggered. For a list of actions, see Actions in Security Profiles and Custom Objects. The Default action is based on the pre-defined action that is part of each signature provided by Palo Alto Networks. To view the default action for a signature, navigate to Objects > Security Profiles > Vulnerability Protection and click Add or select an existing profile. Click the Exceptions tab and then click Show all signatures. A list of all signatures will displayed and you will see an Action column.
Host Type Specify whether to limit the signatures for the rule to those that are client side, server side, or either ( any).
Packet Capture Select this option if you want to capture identified packets. Select single-packet to capture one packet when a threat is detected, or select the extended-capture option to capture from 1 to 50 packets. Extended-capture will provides much more context to the threat when analyzing the threat logs. To view the packet capture, select Monitor > Logs > Threat and locate the log entry you are interested in and then click the green down arrow in the second column. To define the number of packets that should be captured, select Device > Setup > Content-ID and then edit the Content-ID Settings. Packet captures will only occur if the action is allow or alert. If the block action is set, the session is ended immediately.
Category Select a vulnerability category if you want to limit the signatures to those that match that category.
CVE List Specify common vulnerabilities and exposures (CVEs) if you want to limit the signatures to those that also match the specified CVEs. Each CVE is in the format CVE-yyyy-xxxx, where yyyy is the year and xxxx is the unique identifier. You can perform a string match on this field. For example, to find vulnerabilities for the year 2011, enter “2011”.
Vendor ID Specify vendor IDs if you want to limit the signatures to those that also match the specified vendor IDs. For example, the Microsoft vendor IDs are in the form MSyy-xxx, where yy is the two-digit year and xxx is the unique identifier. For example, to match Microsoft for the year 2009, enter “MS09”.
Severity Select severities to match ( informational, low, medium, high, or critical) if you want to limit the signatures to those that also match the specified severities.
Exceptions Tab
Threats Select Enable for each threat for which you want to assign an action, or select All to respond to all listed threats. The list depends on the selected host, category, and severity. If the list is empty, there are no threats for the current selections. Choose an action from the drop-down, or choose from the Action drop-down at the top of the list to apply the same action to all threats. If you selected Show All, then all signatures are listed. If not, only the signatures that are exceptions are listed. Select Packet Capture if you want to capture identified packets. The vulnerability signature database contains signatures that indicate a brute force attack; for example, Threat ID 40001 triggers on an FTP brute force attack. Brute-force signatures trigger when a condition occurs in a certain time threshold. The thresholds are pre-configured for brute force signatures, and can be changed by clicking edit ( ) next to the threat name on the Vulnerability tab (with the Custom option selected). You can specify the number of hits per unit of time and whether the threshold applies to source, destination, or source-and-destination. Thresholds can be applied on a source IP, destination IP or a combination of source IP and destination IP. The default action is shown in parentheses. The CVE column shows identifiers for common vulnerabilities and exposures (CVE). These unique, common identifiers are for publicly known information security vulnerabilities. Use the IP Address Exemptions column to add IP address filters to a threat exception. If IP addresses are added to a threat exception, the threat exception action for that signature will only be taken over the rule's action if the signature is triggered by a session having either the source or destination IP matching an IP in the exception. You can add up to 100 IP addresses per signature. With this option, you do not have to create a new policy rule and new vulnerability profile to create an exception for a specific IP address.

Recommended For You