Scheduled Configuration Export Setting |
Description |
Name
|
Enter a name to identify the configuration export job (up to 31 characters). The name is case-sensitive and must be unique. Use only letters, numbers, hyphens, and underscores.
|
Description
|
Enter an optional description.
|
Enable
|
Select this option to enable the export job.
|
Scheduled export start time (daily)
|
Specify the time of day to start the export (24 hour clock, format HH:MM).
|
Protocol
|
Select the protocol to use to export logs from Panorama to a remote host. Secure Copy (
SCP) is a secure protocol;
FTP
is not.
|
Hostname
|
Enter the IP address or hostname of the target SCP or FTP server.
|
Port
|
Enter the port number on the target server.
|
Path
|
Specify the path to the folder or directory on the target server that will store the exported configuration.
For example, if the configuration bundle is stored in a folder called exported_config within a top level folder called Panorama, the syntax for each server type is:
SCP server:
/Panorama/exported_config
FTP server
: //Panorama/exported_config
|
Enable FTP Passive Mode
|
Select this option to use FTP passive mode.
|
Username
|
Specify the username required to access the target system.
|
Password / Confirm Password
|
Specify the password required to access the target system.
|
Test SCP server connection
|
Select this option to test communication between Panorama and the SCP host/server.
To enable the secure transfer of data, you must verify and accept the host key of the SCP server. The connection is not established until the host key is accepted. If Panorama has an HA configuration, you must perform this verification on each HA peer so that each one accepts the host key of the SCP server.
|