Use the PAN-COMMON-MIB to monitor the following information for Palo Alto Networks firewalls, Panorama, and WF-500 appliances:
Contains such objects as system software/hardware versions, dynamic content versions, serial number, HA mode/state, and global counters.
The global counters include those related to Denial of Service (DoS), IP fragmentation, TCP state, and dropped packets. Tracking these counters enables you to monitor traffic irregularities that result from DoS attacks, system or connection faults, or resource limitations. PAN-COMMON-MIB supports global counters for firewalls but not for Panorama.
Chassis type and M-Series appliance mode (Panorama or Log Collector).
Session utilization information. For example, the total number of active sessions on the firewall or a specific virtual system.
Status of the connection from the firewall to the Panorama management server.
GlobalProtect gateway utilization as a percentage, maximum tunnels allowed, and number of active tunnels.
Logging statistics for each Log Collector, including logging rate, log quotas, disk usage, retention periods, log redundancy (enabled or disabled), the forwarding status from firewalls to Log Collectors, the forwarding status from Log Collectors to external services, and the status of firewall-to-Log Collector connections.
Logging statistics for each firewall, including logging rate, disk usage, retention periods, the forwarding status from individual firewalls to Panorama and external servers, and the status of firewall-to-Log Collector connections.
Extended SNMP Support
Extended SNMP Support PAN-OS support for Simple Network Management Protocol ( SNMP ) now includes the following features. To access the latest MIBs, refer to ...
Management Features PAN-OS 8.0.5 introduces support for the Logging Service . New Management Features Description Administrator-Level Commit and Revert You can now commit, validate, preview, ...
Monitor Panorama and Log Collector Statistics Using SNMP
Monitor Panorama and Log Collector Statistics Using SNMP You can configure an SNMP manager to request information from a Panorama management server and configure Panorama ...
Identify the OID for a System Statistic or Trap
Identify the OID for a System Statistic or Trap To use an SNMP manager for monitoring Palo Alto Networks firewalls, Panorama, or WF-500 appliances, you ...
Verify File Forwarding
Verify File Forwarding After the firewall is set up to Forward Files for WildFire Analysis , use the following options to verify the connection between ...
Collector Group Configuration
Collector Group Configuration To configure a Collector Group , click Add and complete the following fields. Collector Group Settings Configured In Description Name Panorama Collector ...
Configure a Collector Group
Configure a Collector Group Before configuring Collector Groups , decide whether each one will have a single Log Collector or multiple Log Collectors (up to ...
Determine Panorama Log Storage Requirements
Determine Panorama Log Storage Requirements When you Plan Your Panorama Deployment , estimate how much log storage capacity Panorama requires to determine which Panorama Models ...
CLI Cheat Sheet: Networking
CLI Cheat Sheet: Networking Use the following table to quickly locate commands for common networking tasks: If you want to . . . Use . ...