Configure Syslog Monitoring
To Use Syslog for Monitoring a Palo Alto Networks firewall, create a Syslog server profile and assign it to the log settings for each log type. Optionally, you can configure the header format used in syslog messages and enable client authentication for syslog over TLSv1.2.
a Syslog server profile.You can use separate profiles to send syslogs for each log type to a different server. To increase availability, define multiple servers (up to four) in a single profile.
- Select DeviceServer ProfilesSyslog.
- Click Add and enter a Name for the profile.
- If the firewall has more than one virtual system (vsys), select the Location (vsys or Shared) where this profile is available.
- For each syslog server, click Add and
enter the information that the firewall requires to connect to it:
- Name—Unique name for the server profile.
- Syslog Server—IP address or fully qualified domain name (FQDN) of the syslog server.
- Transport—Select TCP, UDP, or SSL (TLS) as the protocol for communicating with the syslog server. For SSL, the firewall supports only TLSv1.2.
- Port—The port number on which to send syslog messages (default is UDP on port 514); you must use the same port number on the firewall and the syslog server.
- Format—Select the syslog message format to use: BSD (the default) or IETF. Traditionally, BSD format is over UDP and IETF format is over TCP or SSL/TLS.
- Facility—Select a syslog standard value (default is LOG_USER) to calculate the priority (PRI) field in your syslog server implementation. Select the value that maps to how you use the PRI field to manage your syslog messages.
- (Optional) To customize the format of the syslog messages that the firewall sends, select the Custom Log Format tab. For details on how to create custom formats for the various log types, refer to the Common Event Format Configuration Guide.
- Click OK to save the server profile.
- Configure syslog forwarding for Traffic, Threat, and WildFire
- See Step Create
a Log Forwarding profile.
- Select ObjectsLog Forwarding, click Add, and enter a Name to identify the profile.
- For each log type and each severity level or WildFire verdict, select the Syslog server profile and click OK.
- See Step Assign the Log Forwarding profile to policy rules and network zones.
- See Step Create a Log Forwarding profile.
- Configure syslog forwarding for System, Config, HIP Match,
and Correlation logs.
- Select DeviceLog Settings.
- For System and Correlation logs, click each Severity level, select the Syslog server profile, and click OK.
- For Config, HIP Match, and Correlation logs, edit the section, select the Syslog server profile, and click OK.
- (Optional) Configure the header format of syslog
messages.The log data includes the unique identifier of the firewall that generated the log. Choosing the header format provides more flexibility in filtering and reporting on the log data for some Security Information and Event Management (SIEM) servers.This is a global setting and applies to all Syslog server profiles configured on the firewall.
- Select DeviceSetupManagement and edit the Logging and Reporting Settings.
- Select the Log Export and Reporting tab
and select the Syslog HOSTNAME Format:
- FQDN (default)—Concatenates the hostname and domain name defined on the sending firewall.
- hostname—Uses the hostname defined on the sending firewall.
- ipv4-address—Uses the IPv4 address of the firewall interface used to send logs. By default, this is the MGT interface.
- ipv6-address—Uses the IPv6 address of the firewall interface used to send logs. By default, this is the MGT interface.
- none—Leaves the hostname field unconfigured on the firewall. There is no identifier for the firewall that sent the logs.
- Click OK to save your changes.
a certificate to secure syslog communication over TLSv1.2.Required only if the syslog server uses client authentication. The syslog server uses the certificate to verify that the firewall is authorized to communicate with the syslog server.Ensure the following conditions are met:
- The private key must be available on the sending firewall; the keys can’t reside on a Hardware Security Module (HSM).
- The subject and the issuer for the certificate must not be identical.
- The syslog server and the sending firewall must have certificates that the same trusted certificate authority (CA) signed. Alternatively, you can generate a self-signed certificate on the firewall, export the certificate from the firewall, and import it in to the syslog server.
- Beginning in PAN-OS 8.0.6, the connection to a Syslog server over TLS is validated using the Online Certificate Status Protocol (OCSP) when available. To prevent certificate verification failures, ensure that the certificate chain is valid and can be verified using OCSP. You cannot bypass OCSP failures for secure connections.
- Select DeviceCertificate ManagementCertificatesDevice Certificates and click Generate.
- Enter a Name for the certificate.
- In the Common Name field, enter the IP address of the firewall sending logs to the syslog server.
- In Signed by, select the trusted
CA or the self-signed CA that the syslog server and the sending
firewall both trust.The certificate can’t be a Certificate Authority nor an External Authority (certificate signing request [CSR]).
- Click Generate. The firewall generates the certificate and key pair.
- Click the certificate Name to edit it, select the Certificate for Secure Syslog check box, and click OK.
- Commit your changes and review the logs on the syslog
- Click Commit.
- To review the logs, refer to the documentation of your syslog management software. You can also review the Syslog Field Descriptions.
Ingest Traps ESM Logs on Panorama
Ingest Traps ESM Logs on Panorama Visibility is a critical first step in preventing and reducing the impact of an attack. To help you meet ...
Traps Log Ingestion on Panorama
Traps Log Ingestion on Panorama Panorama can now serve as a Syslog receiver that can ingest logs from the Traps ESM components using Syslog over ...
Device > Server Profiles > Syslog
Device > Server Profiles > Syslog Select Device Server Profiles Syslog or Panorama Server Profiles Syslog to configure a server profile for forwarding firewall, Panorama, ...
Configure Access to Monitored Servers
Configure Access to Monitored Servers Use the Server Monitoring section to Add server profiles that specify the servers (up to 100) the firewall will monitor. ...
General Log Collector Settings
General Log Collector Settings Panorama > Managed Collectors > General Configure the settings as described in the following table to identify a Log Collector and ...
Configure Log Forwarding
Configure Log Forwarding In an environment where you use multiple firewalls to control and analyze network traffic, any single firewall can display logs and reports ...
Configure Log Forwarding from Panorama to External Destinations
Configure Log Forwarding from Panorama to External Destinations Panorama enables you to forward logs to external services, including syslog, email, SNMP trap, and HTTP-based services. ...
Configure the PAN-OS Integrated User-ID Agent as a Syslog L...
Configure the PAN-OS Integrated User-ID Agent as a Syslog Listener To configure the PAN-OS Integrated User-ID agent to create new user mappings and remove outdated ...
Configure the Windows User-ID Agent as a Syslog Listener
Configure the Windows User-ID Agent as a Syslog Listener To configure the Windows-based User-ID agent to create new user mappings and remove outdated mappings through ...