End-of-Life (EoL)
PAN-OS 8.0.18 Addressed Issues
PAN-OS® 8.0.18 addressed issues
Issue ID | Description |
---|---|
WF500-5023 | Fixed an issue on WF-500 appliances where
the cluster service took longer than expected to start due to a
large number of queued sample data. |
WF500-5022 | Fixed an issue where a non-functioning CLI
command was removed from WF-500 appliances. |
WF500-4785 | Fixed a rare issue on WF-500 appliances
where the firewall did not respond after you upgraded the appliance
from a PAN-OS 8.0.1 release to a PAN-OS 8.0.10 or later release.
With this fix, you can run the new debug software raidfixup auto CLI command
to recover the RAID controller. |
PAN-116851 | Fixed an issue where users were unable to
open an app in their browser after they logged in to GlobalProtect™
Clientless VPN until they closed any and all tabs associated with
that app and then opened the app a second time. This issue occurred
only when an administrator configured a Source User for the Clientless
VPN Security policy rule ( Policies Security <GP-VPN-Security-policy-rule> User |
PAN-113775 | Fixed an issue where the firewall dropped UpdatePDPContext response
packets and displayed the following GTP log event: 122113 . |
PAN-113631 | A security-related fix was made to address
a use-after-free (UAF) vulnerability in the Linux kernel (PAN-SA-2019-0017 / CVE-2019-8912). |
PAN-113189 | A security-related fix was made to correct
log file string-conversion errors that caused parsing issues, which
caused the User-ID ( useridd ) process to stop running. |
PAN-112319 | Fixed an issue where a race condition caused
a process ( mgmtsrvr ) to restart with an error message: Connectingto management server failed . |
PAN-111084 | Fixed an issue where an out-of-memory condition
caused all IPSec tunnels (which includes IKEv1, IKEv2, and NAT-T)
to stop responding. |
PAN-110390 | Fixed an issue on PA-7000 Series firewalls
where invalid filters caused the device management server to stop
responding when you generated a database (DB) report from a remote
firewall. |
PAN-110168 | Fixed an issue where the firewall and Panorama™
web interface did not present HSTS headers to your web browser. |
PAN-109663 | Fixed an intermittent issue where the firewall
dropped packets when the policy rule was set to allow but denied
the packets during a commit or high availability (HA) sync. |
PAN-109551 | Fixed an issue where group-based policy
match stopped responding after User-ID™ restarted. |
PAN-109124 | A security-related fix was made to address
an issue where you were unable to retrieve GlobalProtect cloud service
threat packet captures from the Logging Service on Panorama M-Series
and virtual appliances. |
PAN-108165 | Fixed memory issues on Palo Alto Networks
hardware and virtual appliances that caused intermittent management
plane instability. |
PAN-107708 | Fixed an issue on a firewall where custom
reports did not generate during intermittent times and were not
sent to your email address. |
PAN-106019 | Fixed an issue where a process ( routed )
stopped responding when an incomplete command ran in the XML API. |
PAN-104515 | Fixed an issue where the Panorama web interface
took longer than expected to update Managed Collectors ( Panorama Managed Collectors |
PAN-104264 | Fixed an issue where the Panorama management
server stopped responding when you upgraded from PAN-OS 8.0.9 to
PAN-OS 8.1.3. |
PAN-101955 | Fixed an issue on an M-100 appliance in
an HA configuration where administrators could not reestablish access
to the appliance after a session ended unexpectedly. |
PAN-101379 | Fixed an issue where an invalid Captive
Portal authentication policy was successfully pushed to managed
firewalls, which caused autocommits to fail. |
PAN-101289 | Fixed an issue where simultaneous management
access allowed only one user to log in at a time. |
PAN-99016 | A security-related fix was made to address
the LazyFP state restore vulnerability (CVE-2018-3665 / PAN-SA-2019-0017). |
PAN-97496 | Fixed an issue on a firewall where the ( show runningresource-monitor ingress-backlogs )
CLI command displayed invalid session IDs. |
PAN-90738 | Fixed an issue where a process ( configd ) exceeded
the virtual memory usage limit and caused the firewall to restart.
With this fix, you can run the following commands to avoid this unexpected
restart:
|
PAN-77977 | Fixed an issue where a firewall configured
with a regular expression data pattern ( Objects Custom Objects Data Patterns <profile-name> Pattern
Type |
PAN-63296 | Fixed an issue where commits failed when
a Panorama appliance running a PAN-OS 8.0 release pushed a template
to a firewall running a PAN-OS 7.1 release due to file size limits. |
Most Popular
Recommended For You
Recommended Videos
Recommended videos not found.