A monitor profile is used to monitor IPSec tunnels and
to monitor a next-hop device for policy-based forwarding (PBF) rules.
In both cases, the monitor profile is used to specify an action
to take when a resource (IPSec tunnel or next-hop device) becomes
unavailable. Monitor profiles are optional, but can be very useful
for maintaining connectivity between sites and to ensure that PBF rules
are maintained. The following settings are used to configure a monitor profile.
Enter a name to identify the monitor profile
characters). The name is case-sensitive and must
be unique. Use only letters, numbers, spaces, hyphens, and underscores.
Specify an action to take if the tunnel
is not available. If the threshold number of heartbeats is lost,
the firewall takes the specified action.
for the tunnel to recover; do not take additional action. Packets
will continue to be sent according to the PBF rule.
—Traffic will fail over to
a backup path, if one is available. The firewall uses routing table
lookup to determine routing for the duration of this session.
both cases, the firewall tries to negotiate new IPSec keys to accelerate
Specify the time between heartbeats (range
is 2-10; default is 3).
Specify the number of heartbeats to be lost
before the firewall takes the specified action (range is 2-10; default