BFD Summary Information Tab
BFD summary information includes the following data.
BFD Summary Information Runtime Stats
Interface that is running BFD.
Static route (IP address family of static route) or dynamic routing protocol that is running BFD on the interface.
Local IP Address
IP address of the interface where you configured BFD.
Neighbor IP Address
IP address of BFD neighbor.
BFD states of the local and remote BFD peers: admin down, down, init, or up.
Length of time BFD has been up (hours, minutes, seconds, and milliseconds).
Discriminator for local BFD peer. A discriminator is a unique, nonzero value the peers use to distinguish multiple BFD sessions between them.
Discriminator for remote BFD peer.
Number of BFD errors.
Click Details to see BFD information for a session such as the IP addresses of the local and remote neighbors, the last received remote diagnostic code, number of transmitted and received control packets, number of errors, information about the last packet causing state change, and more.
Reference: BFD Details
Reference: BFD Details To see the following BFD information for a virtual router, you can refer Step View BFD summary and details. Name Value (Example) ...
Configure BFD After you read the BFD Overview , which includes firewall models and interfaces supported, perform the following before configuring BFD: Configure one or ...
Building Blocks of a BFD Profile
Building Blocks of a BFD Profile Network > Network Profiles > BFD Profile You can enable BFD for a static route or dynamic routing protocol ...
BFD for Dynamic Routing Protocols
BFD for Dynamic Routing Protocols In addition to BFD for static routes, the firewall supports BFD for the BGP, OSPF, and RIP routing protocols. The ...
View BFD Summary and Details
View BFD Summary and Details Network > Virtual Routers The following table describes BFD summary information. View BFD Information View a BFD summary. Select Network ...
BGP Peer Group Tab
BGP Peer Group Tab Network > Virtual Router > BGP > Peer Group A BGP peer group is a collection of BGP peers that share ...
BFD Overview When you enable BFD, BFD establishes a session from one endpoint (the firewall) to its BFD peer at the endpoint of a link ...
Network > Network Profiles > BFD Profile
Network > Network Profiles > BFD Profile Bidirectional Forwarding Detection (BFD) enables extremely fast detection of a link failure, which accelerates failover to a different ...
Configure BGP Perform the following task to configure BGP. Configure general virtual router configuration settings. See Virtual Routers for details. Enable BGP for the virtual ...