- Network > Virtual Router > OSPFv3 > Areas
Use the following fields to configure OSPFv3 areas.
OSPv3 – Areas Settings
Select the name of the Authentication profile that you want to specify for this OSPF area.
Select one of the following:
Accept Summaryoption on a stub area Area Border Router (ABR) interface is disabled, the OSPF area will behave as a Totally Stubby Area (TSA) and the ABR will not propagate any summary LSAs.
Addto aggregate LSA destination IPv6 addresses in the area by subnet. Enable or suppress advertising LSAs that match the subnet, and click
OK. Repeat to add additional ranges.
Addand enter the following information for each interface to be included in the area, and click
Configure the virtual link settings to maintain or enhance backbone area connectivity. The settings must be defined for area boarder routers, and must be defined within the backbone area (0.0.0.0). Click
Add, enter the following information for each virtual link to be included in the backbone area, and click
Recommended For You
Recommended videos not found.