- Network > Virtual Routers > RIP
Configuring the Routing Information Protocol (RIP) includes the following general settings:
Select to enable RIP.
Reject Default Route
(Recommended) Select if you do not want to learn any default routes through RIP.
To enable Bidirectional Forwarding Detection (BFD) for RIP globally for the virtual router on a PA-3000 Series, PA-5000 Series, PA-5200 Series, PA-7000 Series, and VM-Series firewall, select one of the following:
Select None (Disable BFD) to disable BFD for all RIP interfaces on the virtual router; you cannot enable BFD for a single RIP interface.
In addition, RIP settings on the following tabs must be configured:
RIP Interfaces Tab
RIP Interfaces Tab Network > Virtual Routers > RIP > Interfaces Use the following fields to configure RIP interfaces: RIP – Interface Settings Description Interface ...
RIP Routing Information Protocol (RIP) is an interior gateway protocol (IGP) that was designed for small IP networks. RIP relies on hop count to determine ...
Configure BFD After you read the BFD Overview , which includes firewall models and interfaces supported, perform the following before configuring BFD: Configure one or ...
OSPFv3 Network > Virtual Router > OSPFv3 Configuring the Open Shortest Path First v3 (OSPFv3) protocol requires configuring the first three settings in the following ...
OSPF Network > Virtual Router > OSPF Configuring the Open Shortest Path First (OSPF) protocol requires you to configure the following general settings (except BFD, ...
RIP Export Rules Tab
RIP Export Rules Tab Network > Virtual Router > RIP > Export Rules RIP export rules allow you to control which routes the virtual router ...
RIP Auth Profiles Tab
RIP Auth Profiles Tab Network > Virtual Router > RIP > Auth Profiles By default, the firewall does not authenticate RIP messages between neighbors. To ...
BFD for Dynamic Routing Protocols
BFD for Dynamic Routing Protocols In addition to BFD for static routes, the firewall supports BFD for the BGP, OSPF, and RIP routing protocols. The ...
RIP Timers Tab
RIP Timers Tab Network > Virtual Router > RIP > Timers The following table describes the timers that control RIP route updates and expirations. RIP ...