Create a Custom Application
To safely enable applications you must classify all traffic, across all ports, all the time. With App-ID, the only applications that are typically classified as unknown traffic—tcp, udp or non-syn-tcp—in the ACC and the Traffic logs are commercially available applications that have not yet been added to App-ID, internal or custom applications on your network, or potential threats.
If you are seeing unknown traffic for a commercial application that does not yet have an App-ID, you can submit a request for a new App-ID here: http://researchcenter.paloaltonetworks.com/submit-an-application/.
To ensure that your internal custom applications do not show up as unknown traffic, create a custom application. You can then exercise granular policy control over these applications in order to minimize the range of unidentified traffic on your network, thereby reducing the attack surface. Creating a custom application also allows you to correctly identify the application in the ACC and Traffic logs, which enables you to audit/report on the applications on your network.
To create a custom application, you must define the application attributes: its characteristics, category and sub-category, risk, port, timeout. In addition, you must define patterns or values that the firewall can use to match to the traffic flows themselves (the signature). Finally, you can attach the custom application to a security policy that allows or denies the application (or add it to an application group or match it to an application filter). You can also create custom applications to identify ephemeral applications with topical interest, such as ESPN3-Video for world cup soccer or March Madness.
In order to collect the right data to create a custom application signature, you'll need a good understanding of packet captures and how datagrams are formed. If the signature is created too broadly, you might inadvertently include other similar traffic; if it is defined too narrowly, the traffic will evade detection if it does not strictly match the pattern.
Custom applications are stored in a separate database on the firewall and this database is not impacted by the weekly App-ID updates.
The supported application protocol decoders that enable the firewall to detect applications that may be tunneling inside of the protocol include the following as of content release version 609: FTP, HTTP, IMAP, POP3, SMB, and SMTP.
The following is a basic example of how to create a custom application.
- Gather information about the application that
you will be able to use to write custom signatures.To do this, you must have an understanding of the application and how you want to control access to it. For example, you may want to limit what operations users can perform within the application (such as uploading, downloading, or live streaming). Or you may want to allow the application, but enforce QoS policing.
- Capture application packets so that you can find unique characteristics about the application on which to base your custom application signature. One way to do this is to run a protocol analyzer, such as Wireshark, on the client system to capture the packets between the client and the server. Perform different actions in the application, such as uploading and downloading, so that you will be able to locate each type of session in the resulting packet captures (PCAPs).
- Because the firewall by default takes packet captures for all unknown traffic, if the firewall is between the client and the server you can view the packet capture for the unknown traffic directly from the Traffic log.
- Use the packet captures to find patterns or values in the packet contexts that you can use to create signatures that will uniquely match the application traffic. For example, look for string patterns in HTTP response or request headers, URI paths, or hostnames. For information on the different string contexts you can use to create application signatures and where you can find the corresponding values in the packet, refer to Creating Custom Threat Signatures.
- Add the custom application.
- Select ObjectsApplications and click Add.
- On the Configuration tab, enter a Name and a Description for the custom application that will help other administrators understand why you created the application.
- (Optional) Select Shared to create the object in a shared location for access as a shared object in Panorama or for use across all virtual systems in a multiple virtual system firewall.
- Define the application Properties and Characteristics.
- Define details about the application, such as the underlying
protocol, the port number the application runs on, the timeout values,
and any types of scanning you want to be able to perform on the
traffic.On the Advanced tab, define settings that will allow the firewall to identify the application protocol:
For example, to create a custom TCP-based application that runs over SSL, but uses port 4443 (instead of the default port for SSL, 443), you would specify the port number. By adding the port number for a custom application, you can create policy rules that use the default port for the application rather than opening up additional ports on the firewall. This improves your security posture.
- Specify the default ports or protocol that the application uses.
- Specify the session timeout values. If you don’t specify timeout values, the default timeout values will be used.
- Indicate any type of additional scanning you plan to perform on the application traffic.
- Define the criteria that the firewall will use to match
the traffic to the new application.You will use the information you gathered from the packet captures to specify unique string context values that the firewall can use to match patterns in the application traffic.
- On the Signatures tab, click Add and define a Signature Name and optionally a Comment to provide information about how you intend to use this signature.
- Specify the Scope of the signature: whether it matches to a full Session or a single Transaction.
- Specify conditions to define signatures by clicking Add And Condition or Add Or Condition.
an Operator to define the type of match conditions
you will use: Pattern Match or Equal
For example, if you are creating a custom application for one of your internal applications, you could use the ssl-rsp-certificate Context to define a pattern match for the certificate response message of a SSL negotiation from the server and create a Pattern to match the commonName of the server in the message as shown here:
- If you selected Pattern Match, select the Context and then use a regular expression to define the Pattern to match the selected context. Optionally, click Add to define a qualifier/value pair. The Qualifier list is specific to the Context you chose.
- If you selected Equal To, select the Context and then use a regular expression to define the Position of the bytes in the packet header to use match the selected context. Choose from first-4bytes or second-4bytes. Define the 4-byte hex value for the Mask (for example, 0xffffff00) and Value (for example, 0xaabbccdd).
- Repeat steps c and d for each matching condition.
- If the order in which the firewall attempts to match the signature definitions is important, make sure the Ordered Condition Match check box is selected and then order the conditions so that they are evaluated in the appropriate order. Select a condition or a group and click Move Up or Move Down. You cannot move conditions from one group to another.
- Click OK to save the signature definition.
- Save the application.
- Click OK to save the custom application definition.
- Click Commit.
- Validate that traffic matches the custom application
- Select PoliciesSecurity and Add a security policy rule to allow the new application.
- Run the application from a client system that is between the firewall and the application and then check the Traffic logs (MonitorTraffic) to make sure that you see traffic matching the new application (and that it is being handled per your policy rule).
Manage Custom or Unknown Applications
Manage Custom or Unknown Applications Palo Alto Networks provides weekly application updates to identify new App-ID signatures. By default, App-ID is always enabled on the ...
Take a Packet Capture for Unknown Applications
Take a Packet Capture for Unknown Applications Palo Alto Networks firewalls automatically generate a packet capture for sessions that contain an application that it cannot ...
Defining Applications Select Objects Applications to Add a new custom application for the firewall to evaluate when applying policies. New Application Settings Description Configuration Tab ...
Take a Custom Application Packet Capture
Take a Custom Application Packet Capture You can configure a Palo Alto Networks firewall to take a packet capture based on an application name and ...
Use Case: Monitor Applications Using Panorama
Use Case: Monitor Applications Using Panorama This example takes you through the process of assessing the efficiency of your current policies and determining where you ...
Actions Supported on Applications
Actions Supported on Applications You can perform any of the following actions on this page: Actions Supported for Applications Description Filter by application To search ...
Policies > Application Override
Policies > Application Override To change how the firewall classifies network traffic into applications, you can specify application override policies. For example, if you want ...
Types of Packet Captures
Types of Packet Captures There are four different types of packet captures you can enable, depending on what you need to do: Custom Packet Capture ...
Applications Overview The Applications page lists various attributes of each application definition, such as the application’s relative security risk (1 to 5). The risk value ...