View DHCP Server Information
Perform this task to view DHCP pool statistics, IP addresses the DHCP server has assigned, the corresponding MAC address, state and duration of the lease, and time the lease began. If the address was configured as a
Reserved Address, the
reservedand there is no
lease_time. If the lease was configured as
durationcolumn displays a value of
- View DHCP pool statistics, IP address the DHCP server assigned, MAC address, state and duration of lease, and lease start time.admin@PA-200>show dhcp server lease interface allinterface: "ethernet1/2" Allocated IPs: 1, Total number of IPs in pool: 5. 20.0000% used ip mac state duration lease_time 192.168.3.11 f0:2f:af:42:70:cf committed 0 Wed Jul 2 08:10:56 2014 admin@PA-200>
- View the options that a DHCP server has assigned to clients.admin@PA-200>show dhcp server settings allInterface GW DNS1 DNS2 DNS-Suffix Inherit source --------------------------------------------------------------------------- ethernet1/2 192.168.3.1 10.43.2.10 10.44.2.10 ethernet1/3 admin@PA-200>
DHCP Leases A lease is defined as the time period for which a DHCP server allocates a network address to a client. The lease might ...
Clear DHCP Leases
Clear DHCP Leases You have several options for clearing DHCP leases. Release expired DHCP Leases of an interface (server), such as ethernet1/2, before the hold ...
View DHCP Client Information
View DHCP Client Information To view the status of IP address leases sent to the firewall when it is acting as a DHCP client, use ...
DHCP Address Allocation Methods
DHCP Address Allocation Methods There are three ways that a DHCP server either assigns or sends an IP address to a client: Automatic allocation —The ...
DHCP Addressing There are three ways that a DHCP server either assigns or sends an IP address to a client: Automatic allocation —The DHCP server ...
DHCP Server Network > DHCP > DHCP Server The following section describes each component of the DHCP server. Before you configure a DHCP server, you ...
Configure an Interface as a DHCP Server
Configure an Interface as a DHCP Server The prerequisites for this task are: Configure a Layer 3 Ethernet or Layer 3 VLAN interface. Assign the ...
Predefined DHCP Options
Predefined DHCP Options Palo Alto Networks firewalls support user-defined and predefined DHCP options in the DHCP server implementation. Such options are configured on the DHCP ...
Configure the Management Interface as a DHCP Client
Configure the Management Interface as a DHCP Client The management interface on the firewall supports DHCP client for IPv4, which allows the management interface to ...