While security policy rules enable you to allow or block traffic on your network, security profiles help you define an
allow but scanrule, which scans allowed applications for threats, such as viruses, malware, spyware, and DDOS attacks. When traffic matches the allow rule defined in the security policy, the security profile(s) that are attached to the rule are applied for further content inspection rules such as antivirus checks and data filtering.
Security profiles are not used in the match criteria of a traffic flow. The security profile is applied to scan traffic after the application or category is allowed by the security policy.
The firewall provides default security profiles that you can use out of the box to begin protecting your network from threats. See Set Up a Basic Security Policy for information on using the default profiles in your security policy. As you get a better understanding about the security needs on your network, see Create Best Practice Security Profiles for the Internet Gateway to learn how you can create custom profiles.
You can add security profiles that are commonly applied together to Create a Security Profile Group; this set of profiles can be treated as a unit and added to security policies in one step (or included in security policies by default, if you choose to set up a default security profile group).
The default profile inspects all of the listed protocol decoders for viruses, and generates alerts for SMTP, IMAP, and POP3 protocols while blocking for FTP, HTTP, and SMB protocols. You can configure the action for a decoder or Antivirus signature and specify how the firewall responds to a threat event:
Customized profiles can be used to minimize antivirus inspection for traffic between trusted security zones, and to maximize the inspection of traffic received from untrusted zones, such as the internet, as well as the traffic sent to highly sensitive destinations, such as server farms.
The Palo Alto Networks WildFire system also provides signatures for persistent threats that are more evasive and have not yet been discovered by other antivirus solutions. As threats are discovered by WildFire, signatures are quickly created and then integrated into the standard Antivirus signatures that can be downloaded by Threat Prevention subscribers on a daily basis (sub-hourly for WildFire subscribers).
Anti-Spyware profiles blocks spyware on compromised hosts from trying to phone-home or beacon out to external command-and-control (C2) servers, allowing you to detect malicious traffic leaving the network from infected clients. You can apply various levels of protection between zones. For example, you may want to have custom Anti-Spyware profiles that minimize inspection between trusted zones, while maximizing inspection on traffic received from an untrusted zone, such as internet-facing zones.
You can define your own custom Anti-Spyware profiles, or choose one of the following predefined profiles when applying Anti-Spyware to a Security policy rule:
When the firewall detects a threat event, you can configure the following actions in an Anti-Spyware profile:
In addition, you can enable the DNS Sinkholing action in Anti-Spyware profiles to enable the firewall to forge a response to a DNS query for a known malicious domain, causing the malicious domain name to resolve to an IP address that you define. This feature helps to identify infected hosts on the protected network using DNS traffic. Infected hosts can then be easily identified in the traffic and threat logs because any host that attempts to connect to the sinkhole IP address are most likely infected with malware.
Anti-Spyware and Vulnerability Protection profiles are configured similarly.
Vulnerability Protection Profiles
Vulnerability Protection profiles stop attempts to exploit system flaws or gain unauthorized access to systems. While Anti-Spyware profiles help identify infected hosts as traffic leaves the network, Vulnerability Protection profiles protect against threats entering the network. For example, Vulnerability Protection profiles help protect against buffer overflows, illegal code execution, and other attempts to exploit system vulnerabilities. The default Vulnerability Protection profile protects clients and servers from all known critical, high, and medium-severity threats. You can also create exceptions, which allow you to change the response to a specific signature.
When the firewall detects a threat event, you can configure the following actions in an Anti-Spyware profile:
URL Filtering Profiles
URL Filtering profiles enable you to monitor and control how users access the web over HTTP and HTTPS. The firewall comes with a default profile that is configured to block websites such as known malware sites, phishing sites, and adult content sites. You can use the default profile in a security policy, clone it to be used as a starting point for new URL filtering profiles, or add a new URL profile that will have all categories set to allow for visibility into the traffic on your network. You can then customize the newly added URL profiles and add lists of specific websites that should always be blocked or allowed, which provides more granular control over URL categories.
Data Filtering Profiles
Data filtering profiles prevent sensitive information such as credit card or social security numbers from leaving a protected network. The data filtering profile also allows you to filter on key words, such as a sensitive project name or the word confidential. It is important to focus your profile on the desired file types to reduce false positives. For example, you may only want to search Word documents or Excel spreadsheets. You may also only want to scan web-browsing traffic, or FTP.
You can create custom data pattern objects and attach them to a Data Filtering profile to define the type of information on which you want to filter. Create data pattern objects based on:
If you’re using a third-party, endpoint data loss prevention (DLP) solutions to populate file properties to indicate sensitive content, this option enables the firewall to enforce your DLP policy.
To get started, Set Up Data Filtering.
File Blocking Profiles
The firewall uses file blocking profiles to block specified file types over specified applications and in the specified session flow direction (inbound/outbound/both). You can set the profile to alert or block on upload and/or download and you can specify which applications will be subject to the file blocking profile. You can also configure custom block pages that will appear when a user attempts to download the specified file type. This allows the user to take a moment to consider whether or not they want to download a file.
You can define your own custom File Blocking profiles, or choose one of the following predefined profiles when applying file blocking to a Security policy rule. The predefined profiles, which are available with content release version 653 and later, allow you to quickly enable best practice file blocking settings:
Configure a file blocking profile with the following actions:
To get started, Set Up File Blocking.
WildFire Analysis Profiles
Use a WildFire analysis profile to enable the firewall to forward unknown files or email links for WildFireanalysis. Specify files to be forwarded for analysis based on application, file type, and transmission direction (upload or download). Files or email links matched to the profile rule are forwarded either the WildFire public cloud or the WildFire private cloud (hosted with a WF-500 appliance), depending on the analysis location defined for the rule. If a profile rule is set to forward files to the WildFire public cloud, the firewall also forwards files that match existing antivirus signatures, in addition to unknown files.
You can also use the WildFire analysis profiles to set up a Wildfire hybrid cloud deployment. If you are using a WildFire appliance to analyze sensitive files locally (such as PDFs), you can specify for less sensitive files types (such as PE files) or file types that are not supported for WildFire appliance analysis (such as APKs) to be analyzed by the WildFire public cloud. Using both the WildFire appliance and the WildFire cloud for analysis allows you to benefit from a prompt verdict for files that have already been processed by the cloud, and for files that are not supported for appliance analysis, and frees up the appliance capacity to process sensitive content.
DoS Protection Profiles
DoS protection profiles provide detailed control for Denial of Service (DoS) protection policies. DoS policies allow you to control the number of sessions between interfaces, zones, addresses, and countries based on aggregate sessions or source and/or destination IP addresses. There are two DoS protection mechanisms that the Palo Alto Networks firewalls support.
You can enable both types of protection mechanisms in a single DoS protection profile.
The DoS profile is used to specify the type of action to take and details on matching criteria for the DoS policy. The DoS profile defines settings for SYN, UDP, and ICMP floods, can enable resource protect and defines the maximum number of concurrent connections. After you configure the DoS protection profile, you then attach it to a DoS policy.
When configuring DoS protection, it is important to analyze your environment in order to set the correct thresholds and due to some of the complexities of defining DoS protection policies, this guide will not go into detailed examples.
Zone Protection Profiles
Zone Protection Profiles provide additional protection between specific network zones in order to protect the zones against attack. The profile must be applied to the entire zone, so it is important to carefully test the profiles in order to prevent issues that may arise with the normal traffic traversing the zones. When defining packets per second (pps) thresholds limits for zone protection profiles, the threshold is based on the packets per second that do not match a previously established session.
Security Profile Group
A security profile group is a set of security profiles that can be treated as a unit and then easily added to security policies. Profiles that are often assigned together can be added to profile groups to simplify the creation of security policies. You can also setup a default security profile group—new security policies will use the settings defined in the default profile group to check and control traffic that matches the security policy. Name a security profile group default to allow the profiles in that group to be added to new security policies by default. This allows you to consistently include your organization’s preferred profile settings in new policies automatically, without having to manually add security profiles each time you create new rules.
Actions in Security Profiles
Actions in Security Profiles The action specifies how the firewall responds to a threat event. Every threat or virus signature that is defined by Palo ...
Overriding or Reverting a Security Policy Rule
Overriding or Reverting a Security Policy Rule The default security rules—interzone-default and intrazone-default—have predefined settings that you can override on a firewall or on Panorama. ...
Objects > Security Profiles
Objects > Security Profiles Security profiles provide threat protection in Security Policy. Each Security policy rule can include one or more Security Profiles. The following ...
Create Threat Exceptions
Create Threat Exceptions Palo Alto Networks defines a recommended default action (such as block or alert) for threat signatures. You can use a threat ID ...
Create Best Practice Security Profiles for the Internet Gat...
Use these File Blocking settings as a best practice at your internet gateway. ...
Set Up Antivirus, Anti-Spyware, and Vulnerability Protectio...
Set Up Antivirus, Anti-Spyware, and Vulnerability Protection Every Palo Alto Networks next-generation firewall comes with predefined Antivirus , Anti-Spyware , and Vulnerability Protection profiles that ...
Best Practices for Securing Your Network from Layer 4 and L...
Best Practices for Securing Your Network from Layer 4 and Layer 7 Evasions To monitor and protect your network from most Layer 4 and Layer ...
Create the Data Center Best Practice Antivirus Profile
Protect your data center from viruses and malware hidden in HTTP, SMTP, IMAP, POP3, FTP, and SMB files. ...
How to Create Data Center Best Practice Security Profiles
Use Security Profiles to protect against vulnerabilities, spyware, viruses, bad file types, and unknown threats. ...