Network > GlobalProtect > Block List

Select
Network
GlobalProtect
Device Block List
(
firewall only
) to add devices to the GlobalProtect device block list. Devices on this list are not permitted to establish a GlobalProtect VPN connection.
Device Block List Settings
Description
Name
Enter a name for the device block list (up to 31 characters). The name is case-sensitive and must be unique. Use only letters, numbers, spaces, hyphens, and underscores.
Location
For a firewall that is in multiple virtual system mode, the
Location
is the virtual system (vsys) where the GlobalProtect gateway is available. For a firewall that is not in multi-vsys mode, the
Location
field does not appear in the GlobalProtect Gateway dialog. After you save the gateway configuration, you cannot change the
Location
.
Host ID
Enter the unique ID that identifies the endpoint, a combination of host name and unique device ID. For each Host ID, specify the corresponding Hostname.
Hostname
Enter a hostname to identify the device (up to 31 characters). The name is case-sensitive and must be unique. Use only letters, numbers, spaces, hyphens, and underscores.

Recommended For You