Network Services Tab
Select NetworkGlobalProtectGatewaysAgentNetwork Services to configure DNS settings that will are assigned to the virtual network adapter on the endpoint when the GlobalProtect app establishes a tunnel with the gateway.
Network Services options are available only if you have enable tunnel mode and define a tunnel interface on the Tunnel Settings Tab.
GlobalProtect Gateway Client Network Services Configuration Settings
Select a source to propagate DNS server and other settings from the selected DHCP client or PPPoE client interface into the GlobalProtect apps’ configuration. With this setting, all client network configurations, such as DNS servers and WINS servers, are inherited from the configuration of the interface selected in the Inheritance Source.
Check inheritance source status
Click Inheritance Source to see the server settings that are currently assigned to the client interfaces.
Enter the IP addresses of the primary and secondary servers that provide DNS to the clients.
Enter the IP addresses of the primary and secondary servers that provide Windows Internet Naming Service (WINS) to the endpoints.
Inherit DNS Suffixes
Select this option to inherit the DNS suffixes from the inheritance source.
Add a suffix that the endpoint should use locally when an unqualified hostname, which it cannot resolve, is entered. You can enter multiple suffixes (up to 100) by separating each suffix with a comma.
DHCP Server Network > DHCP > DHCP Server The following section describes each component of the DHCP server. Before you configure a DHCP server, you ...
GlobalProtect Gateway Satellite Configuration Tab
GlobalProtect Gateway Satellite Configuration Tab A satellite is a Palo Alto Networks firewall—typically at a branch office—that acts as a GlobalProtect app to enable it ...
Configure an Interface as a DHCP Server
Configure an Interface as a DHCP Server The prerequisites for this task are: Configure a Layer 3 Ethernet or Layer 3 VLAN interface. Assign the ...
Device > Server Profiles > DNS
Device > Server Profiles > DNS To simplify configuration for a virtual system, a DNS server profile allows you to specify the virtual system that ...
Configure a DNS Server Profile
Configure a DNS Server Profile Configure a DNS Server Profile , which simplifies configuration of a virtual system. The Primary DNS or Secondary DNS address ...
Configure a GlobalProtect Gateway
Configure a GlobalProtect Gateway After you have completed the prerequisite tasks, configure the GlobalProtect Gateways : Add a gateway. Select Network GlobalProtect Gateways , and ...
DNS Proxy Settings
DNS Proxy Settings Click Add and configure the firewall to act as a DNS proxy. You can configure a maximum of 256 DNS proxies on ...
Configure GlobalProtect Gateways for LSVPN
Configure GlobalProtect Gateways for LSVPN Because the GlobalProtect configuration that the portal delivers to the satellites includes the list of gateways the satellite can connect ...
Configure a DNS Proxy Object
Configure a DNS Proxy Object If your firewall is to act as a DNS proxy, perform this task to configure a DNS Proxy Object . ...