1. Home
    2. PAN-OS
    3. PAN-OS® Web Interface Reference
    4. GlobalProtect
    5. Objects > GlobalProtect > HIP Objects
    6. HIP Objects Data Loss Prevention Tab
    End-of-Life (EoL)

    HIP Objects Data Loss Prevention Tab

    Select
    Objects
    GlobalProtect
    HIP Objects
    Data Loss Prevention
     to configure HIP matching that is based on whether the GlobalProtect endpoints are running data loss prevention software.
    HIP Object Data Loss Prevention Settings
    Select
    Data Loss Prevention
     to enable matching on the data loss prevention (DLP) status on the host (
    Windows hosts only
    ) and then define additional matching criteria for the match as follows:
    • Is Enabled
      —Match on whether DLP software is enabled on the host. If the
      Is Installed
       selection is cleared, this field is automatically set to
      none
       and is disabled for editing.
    • Is Installed
      —Match on whether DLP software is installed on the host.
    • Vendor and Product
      —Define specific DLP software vendors and/or products to look for on the host to determine a match. Click
      Add
       and then choose a
      Vendor
       from the drop-down. Optionally, click
      Add
       to choose a specific
      Product
      . Click
      OK
       to save the settings.
    • Exclude Vendor
      —Select this option to match hosts that do not have software from the specified vendor.

    Recommended For You

    Recommended Videos

    Recommended videos not found.

    © 2022 Palo Alto Networks, Inc. All rights reserved.

    Techdocs Logo