BGP Redist Rules Tab
- Network > Virtual Router > BGP > Redist Rules
Configure the settings described in the following table to create rules for redistributing BGP routes.
BGP Redistribution Rules Settings
Allow Redistribute Default Route
Permits the firewall to redistribute its default route to BGP peers.
Add an IP subnet or create a redistribution rule first.
Select to enable this redistribution rule.
Specify which route table the route will be redistributed into: unicast, multicast, or both.
Enter a metric in the range 1-65,535.
Select the origin for the redistributed route (igp, egp, or incomplete). The value incomplete indicates a connected route.
Enter a MED for the redistributed route in the range 0-4,294,967,295.
Set Local Preference
Enter a local preference for the redistributed route in the range 0-4,294,967,295.
Set AS Path Limit
Enter an AS path limit for the redistributed route in the range 1-255.
Select or enter a 32-bit value in decimal or hexadecimal or in AS:VAL format; AS and VAL are each in the range 0-65,535. Enter a maximum of 10 communities.
Set Extended Community
Enter a 64-bit value in hexadecimal or in TYPE:AS:VAL or TYPE:IP:VAL format. TYPE is 16 bits; AS or IP is 16 bits; VAL is 32 bits. Enter a maximum of five extended communities.
Route Redistribution Route redistribution on the firewall is the process of making routes that the firewall learned from one routing protocol (or a static or ...
Route Redistribution Network > Virtual Router > Redistribution Profiles Redistribution profiles direct the firewall to filter, set priority, and perform actions based on desired network ...
Configure BGP Perform the following task to configure BGP. Configure general virtual router configuration settings. See Virtual Routers for details. Enable BGP for the virtual ...
BGP Aggregate Tab
BGP Aggregate Tab Network > Virtual Router > BGP > Aggregate Route aggregation is the act of combining specific routes (those with a longer prefix ...
BGP Import and Export Tabs
BGP Import and Export Tabs Network > Virtual Router > BGP > Import Network > Virtual Router > BGP > Export Add a new Import ...
OSPF Export Rules Tab
OSPF Export Rules Tab Network > Virtual Router > OSPF > Export Rules The following table describes the fields to export OSPF routes: OSPF – ...
OSPFv3 Export Rules Tab
OSPFv3 Export Rules Tab Network > Virtual Router > OSPFv3 > Export Rules Use the following fields to export OSPFv3 routes. OSPFv3 – Export Rules ...
RIP Export Rules Tab
RIP Export Rules Tab Network > Virtual Router > RIP > Export Rules RIP export rules allow you to control which routes the virtual router ...
Configure User-ID Redistribution
Configure User-ID Redistribution Before you configure User-ID redistribution: Plan the redistribution architecture. Some factors to consider are: Which firewalls will enforce policies for all users ...