| Choose the type of Rendezvous Point (RP)
that will run on this virtual router. A static RP must be explicitly
configured on other PIM routers whereas a candidate RP is elected automatically. None —Choose if there is no RP running
on this virtual router. Static —Specify a static IP address
for the RP and choose options for RP Interface and RP
Address from the drop-down. Select Override
learned RP for the same group if you want to use the
specified RP instead of the RP elected for this group. Candidate —Specify the following information
for the candidate RP running on this virtual router: RP
Interface —Select an interface for the RP. Valid interface
types include loopback, L3, VLAN, aggregate Ethernet, and tunnel. RP Address —Select an IP address for
the RP. Priority —Specify a priority for candidate
RP messages (default 192). Advertisement interval —Specify an
interval between advertisements for candidate RP messages.
Group list —If you choose Static or Candidate ,
click Add to specify a list of groups for
which this candidate RP is proposing to be the RP.
|