Configure Access to the NSX Manager
- Panorama > VMware NSX > Service Managers
To enable Panorama to communicate with the NSX Manager, Add and configure the settings as described in the following table.
Service Manager Name
Enter a name to identify the VM-Series firewall as a service. This name displays on the NSX Manager and is used to deploy the VM-Series firewall on-demand.
Supports up to 63 characters; use only letters, numbers, hyphens, and underscores.
(Optional) Enter a label to describe the purpose or function of this service.
NSX Manager URL
Specify the URL that Panorama will use to establish a connection with the NSX Manager.
NSX Manager Login
Enter the authentication credentials—username and password—configured on the NSX Manager. Panorama uses these credentials to authenticate with the NSX Manager.
NSX Manager Password
Confirm NSX Manager Password
Specify the service definitions associated with this service manager. Each service manager supports up to 32 service definitions.
After committing the changes to Panorama, the VMware Service Manager window displays the connection status between Panorama and the NSX Manager.
Displays the connection status between Panorama and the NSX Manager.
A successful connection displays as Registered—Panorama and the NSX Manager are synchronized and the VM-Series firewall is registered as a service on the NSX Manager.
For an unsuccessful connection, the status can be:
Synchronize Dynamic Objects
Click Synchronize Dynamic Objects to refresh the dynamic object information from the NSX Manager. Synchronizing dynamic objects enables you to maintain context on changes in the virtual environment and allows you to safely enable applications by automatically updating the Dynamic Address Groups used in policy rules.
On Panorama, you can view only the IP addresses that are dynamically registered from the NSX Manager. Panorama does not display the dynamic IP addresses that are registered directly to the firewalls. If you use VM Information Sources (not supported on the VM-Series NSX edition firewalls) or the XML API to register IP addresses dynamically to the firewalls, you must log in to each firewall to view the complete list of dynamic IP addresses (both those that Panorama pushed and those that are locally registered) on the firewall.
Select NSX Config-Sync to synchronize the service definitions configured on Panorama with the NSX Manager. If you have any pending commits on Panorama, this option is not available.
If the synchronization fails, view the details in the error message to know whether the error is on Panorama or on the NSX Manager. For example, when you delete a service definition on Panorama, the synchronization with the NSX Manager fails if the service definition is referenced in a rule on the NSX Manager. Use the information in the error message to determine the reason for failure and where you need to take corrective action (on Panorama or on the NSX Manager).
Enable Communication Between the NSX Manager and Panorama
Enable Communication Between the NSX Manager and Panorama To automate the provisioning of the VM-Series firewall for NSX, enable communication between the NSX Manager and ...
Create the Service Definitions on Panorama
Create the Service Definitions on Panorama A service definition specifies the configuration for the VM-Series firewalls installed on each host in an ESXi cluster. The ...
Deploy the VM-Series Firewall in a Multi-NSX Manager Environment
Deploy the VM-Series Firewall in a Multi-NSX Manager Environment Whether you are deploying a single NSX Manager or a multi-NSX Manager environment, set up the ...
Create Service Definitions
Create Service Definitions Panorama > VMware NSX > Service Definitions A service definition allows you to register the VM-Series firewall as a partner security service ...
Register the VM-Series Firewall as a Service on the NSX Manager
Register the VM-Series Firewall as a Service on the NSX Manager You need to enable communication between Panorama and the NSX Manager and then register ...
How Do the Components in the VM-Series Firewall for NSX Solution Work Together?
How Do the Components in the VM-Series Firewall for NSX Solution Work Together? To meet the security challenges in the software-defined data center, the NSX ...
Panorama Panorama is used to register the VM-Series firewall for NSX as the Palo Alto Networks NGFW service on the NSX Manager. Registering the Palo ...
VM-Series Firewall for NSX Deployment Checklist
VM-Series Firewall for NSX Deployment Checklist To deploy the VM-Series firewall for NSX, use the following workflow: Step 1: Set up the Components —To deploy ...
Panorama > VMware NSX
Panorama > VMware NSX To automate the provisioning of a VM-Series NSX edition firewall, you must enable communication between the NSX Manager and Panorama. When ...