- Device > Authentication Profile
Select DeviceAuthentication Profile or PanoramaAuthentication Profile to manage authentication profiles. To create a new profile, Add one and complete the following fields.
After configuring an authentication profile, use the test authentication CLI command to determine whether the firewall or Panorama management server can communicate with the back-end authentication server and whether the authentication request succeeded. You can perform authentication tests on the candidate configuration to determine whether the configuration is correct before you commit.
Authentication Profile Settings
Enter a name to identify the profile. The name is case-sensitive, can have up to 31 characters, and can include only letters, numbers, spaces, hyphens, underscores, and periods. The name must be unique in the current Location (firewall or virtual system) relative to other authentication profiles and to authentication sequences.
In a firewall that is in multiple virtual systems mode, if the Location of the authentication profile is a virtual system, don’t enter the same name as an authentication sequence in the Shared location. Similarly, if the profile Location is Shared, don’t enter the same name as a sequence in a virtual system. While you can commit an authentication profile and sequence with the same names in these cases, it can result in reference errors.
Select the scope in which the profile is available. In the context of a firewall that has more than one virtual system (vsys), select a vsys or select Shared (all virtual systems). In any other context, you can’t select the Location; its value is predefined as Shared (firewalls) or as Panorama. After you save the profile, you can’t change its Location.
The firewall invokes the authentication service that you configure in this tab before invoking any multi-factor authentication (MFA) services that you add in the Factors Tab.
If the firewall integrates with an MFA vendor through RADIUS instead of the vendor API, you must configure a RADIUS server profile for that vendor, not an MFA server profile.
Select the type of service that provides the first (and optionally the only) authentication challenge that users see. Based on your selection, the dialog displays other settings that you define for the service. The options are:
Administrators can use SAML to authenticate to the firewall or Panorama web interface but not to the CLI.
(RADIUS, TACACS+, LDAP, or Kerberos only)
IdP Server Profile
Select the SAML Identity Provider server profile from the drop-down. See Device>ServerProfiles> SAML Identity Provider.
Retrieve user group from RADIUS
Select this option to collect user group information from Vendor-Specific Attributes (VSAs) defined on the RADIUS server. The firewall uses the information to match authenticating users against Allow List entries, not for enforcing policies or generating reports.
Retrieve user group from TACACS+
Select this option to collect user group information from Vendor-Specific Attributes (VSAs) defined on the TACACS+ server. The firewall uses the information to match authenticating users against Allow List entries, not for enforcing policies or generating reports.
Enter an LDAP directory attribute that uniquely identifies the user and functions as the login ID for that user.
Password Expiry Warning
If the authentication profile is for GlobalProtect users, enter the number of days before password expiration to start displaying notification messages to users to alert them that their passwords are expiring in x number of days. By default, notification messages will display seven days before password expiry (range is 1 to 255). Users will not be able to access the VPN if their passwords expire.
Consider configuring the GlobalProtect agents to use the pre-logon connection method . This will enable users to connect to the domain to change their passwords even after the password has expired.
If users allow their passwords to expire, the administrator can assign a temporary LDAP password to enable users to log in to the VPN. In this workflow, we recommend setting the Authentication Modifier in the portal configuration to Cookie authentication for config refresh (otherwise, the temporary password will be used to authenticate to the portal, but the gateway login will fail, preventing VPN access).
Certificate for Signing Requests
Select the certificate that the firewall will use to sign SAML messages that it sends to the identity provider (IdP). This field is required if you enable the Sign SAML Message to IdP option in the IdP Server Profile (see Device>ServerProfiles> SAML Identity Provider). Otherwise, selecting a certificate to sign SAML messages is optional.
When generating or importing a certificate and its associated private key, the key usage attributes specified in the certificate control how you can use the key:
Palo Alto Networks recommends using a signing certificate to ensure the integrity of SAML messages sent to the IdP.
Enable Single Logout
Select this option to enable users to log out of every authenticated service by logging out of any single service. Single logout (SLO) applies only to services that users accessed through SAML authentication. The services can be external to your organization or internal (such as the firewall web interface). This option applies only if you entered an Identity Provider SLO URL in the IdP Server Profile. You cannot enable SLO for Captive Portal users.
Select the Certificate Profile that the firewall will use to validate:
(All authentication types except SAML)
The firewall uses the User Domain for matching authenticating users against Allow List entries and for User-ID group mapping .
You can specify a Username Modifier to modify the domain/username string that a user enters during login. The firewall uses the modified string for authentication. Select from the following options:
If the Username Modifier includes the %USERDOMAIN% variable, the User Domain value replaces any domain string that the user enters. If you specify the %USERDOMAIN% variable and leave the User Domain blank, the firewall removes any user-entered domain string. The firewall resolves domain names to the appropriate NetBIOS name for User-ID group mapping. This applies to both parent and child domains. User Domain modifiers take precedence over automatically derived NetBIOS names.
(All authentication types except SAML)
If your network supports Kerberos single sign-on (SSO), enter the Kerberos Realm (up to 127 characters). This is the hostname portion of the user login name. For example, the user account name user@EXAMPLE.LOCAL has realm EXAMPLE.LOCAL.
(All authentication types except SAML)
If your network supports Kerberos single sign-on (SSO) , click Import, click Browse to locate the keytab file, and then click OK. A keytab contains Kerberos account information (principal name and hashed password) for the firewall, which is required for SSO authentication. Each authentication profile can have one keytab. During authentication, the firewall first tries to use the keytab to establish SSO. If it succeeds and the user attempting access is in the Allow List, authentication succeeds immediately. Otherwise, the authentication process falls back to manual authentication (username/password) of the specified Type, which doesn’t have to be Kerberos.
If the firewall is in FIPS/CC mode, the algorithm must be aes128-cts-hmac-sha1-96 or aes256-cts-hmac-sha1-96. Otherwise, you can also use des3-cbc-sha1 or arcfour-hmac. However, if the algorithm in the keytab does not match the algorithm in the service ticket that the Ticket Granting Service issues to clients to enable SSO, the SSO process fails. Your Kerberos administrator determines which algorithms the service tickets use.
Enter the SAML attribute that identifies the username of an authenticating user in messages from the IdP (default is username). If the IdP Server Profile contains metadata that specifies a username attribute, the firewall automatically populates this field with that attribute. The firewall matches usernames retrieved from SAML messages with users and user groups in the Allow List of the authentication profile. Because you cannot configure the firewall to modify the domain/username string that a user enters during SAML logins, the login username must exactly match an Allow List entry. This is the only SAML attribute that is mandatory.
SAML messages might display the username in the subject field. The firewall automatically checks the subject field if the username attribute doesn’t display the username.
User Group Attribute
Enter the SAML attribute that identifies the user group of an authenticating user in messages from the IdP (default is usergroup). If the IdP Server Profile contains metadata that specifies a user group attribute, the field automatically uses that attribute. The firewall uses the group information to match authenticating users against Allow List entries, not for policies or reports.
Admin Role Attribute
Enter the SAML attribute that identifies the administrator role of an authenticating user in messages from the IdP (default is admin-role). This attribute applies only to firewall administrators, not to end users. If the IdP Server Profile contains metadata that specifies an admin-role attribute, the firewall automatically populates this field with that attribute. The firewall matches its predefined (dynamic) roles or Admin Role profiles with the roles retrieved from SAML messages to enforce role-based access control. If a SAML message has multiple admin-role values for an administrator with only one role, matching applies only to the first (left-most) value in the admin-role attribute. For an administrator with more than one role, the matching can apply to multiple values in the attribute.
Access Domain Attribute
Enter the SAML attribute that identifies the access domain of an authenticating user in messages from the IdP (default is access-domain). This attribute applies only to firewall administrators, not to end users. If the IdP Server Profile contains metadata that specifies an access-domain attribute, the firewall automatically populates this field with that attribute. The firewall matches its locally configured access domains with those retrieved from SAML messages to enforce access control. If a SAML message has multiple access-domain values for an administrator with only one access domain, matching applies only to the first (left-most) value in the access-domain attribute. For an administrator with more than one access domain, the matching can apply to multiple values in the attribute.
Enable Additional Authentication Factors
Select this option if you want the firewall to invoke additional authentication factors (challenges) after users successfully respond to the first factor (specified in the Type field on the Authentication tab).
Additional authentication factors are supported for end-user authentication through Authentication Policy only. Additional factors are not supported for remote user authentication to GlobalProtect portals and gateways or for administrator authentication to the PAN-OS or Panorama web interface. Although you can configure additional factors, they will not be enforced for these use cases. You can, however, integrate with MFA vendors using RADIUS or SAML for all authentication use cases.
After configuring an authentication profile that uses multi-factor authentication (MFA), you must assign it to an authentication enforcement object (Objects>Authentication) and assign the object to the Authentication policy rules (Policies>Authentication) that control access to your network resources.
Add an MFA server profile (Device>ServerProfiles> Multi Factor Authentication) for each authentication factor that the firewall will invoke after users successfully respond to the first factor (specified in the Type field on the Authentication tab). The firewall invokes each factor in the top-to-bottom order that you list the MFA services that provide the factors. To change the order, select a server profile and Move Up or Move Down. You can specify up to three additional factors. Each MFA service provides one factor. Some MFA services let users choose one factor from a list of several. The firewall integrates with these MFA services through vendor APIs. Additional MFA vendor API integrations are added periodically through Applications or Applications and Threats content updates.
Click Add and select all or select the specific users and groups that can authenticate with this profile. When a user authenticates, the firewall matches the associated username or group against the entries in this list. If you don’t add entries, no users can authenticate.
To limit authentication to only the users who have legitimate business access needs and reduce the attack surface, specify users or user groups, don’t use all.
If you entered a User Domain value, you don’t need to specify domains in the Allow List. For example, if the User Domain is businessinc and you want to add user admin1 to the Allow List, entering admin1 has the same effect as entering businessinc\admin1. You can specify groups that already exist in your directory service or specify custom groups based on LDAP filters.
(All authentication types except SAML)
Enter the number of failed successive login attempts (0 to 10) that the firewall allows before locking out the user account. A value of 0 specifies unlimited login attempts. The default value is 0 for firewalls in normal operational mode and 10 for firewalls in FIPS-CC mode.
Set the number of Failed Attempts to 5 or fewer to accommodate a reasonable number of retries in case of typing errors, while preventing malicious systems from trying brute force methods to log in to the firewall.
If you set the Failed Attempts to a value other than 0 but leave the Lockout Time at 0, the Failed Attempts is ignored and the user is never locked out.
(All authentication types except SAML)
Enter the number of minutes (range is 0 to 60; default is 0) for which the firewall locks out a user account after the user reaches the number of Failed Attempts. A value of 0 means the lockout applies until an administrator manually unlocks the user account.
Set the Lockout Time to at least 30 minutes to prevent continuous login attempts from a malicious actor.
If you set the Lockout Time to a value other than 0 but leave the Failed Attempts at 0, the Lockout Time is ignored and the user is never locked out.
Set Up SAML Authentication
Set Up SAML Authentication Security Assertion Markup Language (SAML) is an XML-based, open-standard data format used to exchange authentication and authorization data between parties, specifically ...
Configure SAML Authentication for Panorama Administrators
Configure SAML Authentication for Panorama Administrators You can use Security Assertion Markup Language (SAML) 2.0 for administrative access to the Panorama web interface (but not ...
Configure SAML Authentication
Configure SAML Authentication To configure SAML single sign-on (SSO) and single logout (SLO), you must register the firewall and the IdP with each other to ...
Configure an Authentication Profile and Sequence
Configure an Authentication Profile and Sequence An authentication profile defines the authentication service that validates the login credentials of administrators who access the firewall web ...
Configure SAML 2.0 Authentication (API)
Configure SAML 2.0 Authentication (API) Use the PAN-OS XML API to automate the configuration of SAML 2.0 single sign-on (SSO) and single logout (SLO). To ...
Configure Local or External Authentication for Firewall Adm...
Configure Local or External Authentication for Firewall Administrators You can use Local Authentication and External Authentication Services to authenticate administrators who access the firewall. These ...
Configure MFA Between Duo and the Firewall
Configure MFA Between Duo and the Firewall Multi-factor authentication (MFA) allows you to protect company assets by using multiple factors to verify the identity of ...
Configure Multi-Factor Authentication
Configure Multi-Factor Authentication To use Multi-Factor Authentication (MFA) for protecting sensitive services and applications, you must configure Captive Portal to display a web form for ...
Device > Server Profiles > SAML Identity Provider
Device > Server Profiles > SAML Identity Provider Use this page to register a Security Assertion Markup Language (SAML) 2.0 identity provider (IdP) with the ...