BGP Redistribution Rules Settings
Allow Redistribute Default Route
Permits the firewall to redistribute its default route to BGP peers.
Addan IP subnet or create a redistribution rule first.
Select to enable this redistribution rule.
Specify which route table the route will be redistributed into:
Enter a metric in the range 1-65,535.
Select the origin for the redistributed route (
incomplete). The value
incompleteindicates a connected route.
Enter a MED for the redistributed route in the range 0-4,294,967,295.
Set Local Preference
Enter a local preference for the redistributed route in the range 0-4,294,967,295.
Set AS Path Limit
Enter an AS path limit for the redistributed route in the range 1-255.
Select or enter a 32-bit value in decimal or hexadecimal or in AS:VAL format; AS and VAL are each in the range 0-65,535. Enter a maximum of 10 communities.
Set Extended Community
Enter a 64-bit value in hexadecimal or in TYPE:AS:VAL or TYPE:IP:VAL format. TYPE is 16 bits; AS or IP is 16 bits; VAL is 32 bits. Enter a maximum of five extended communities.