- Network > Virtual Router > OSPFv3
Configuring the Open Shortest Path First v3 (OSPFv3) protocol requires configuring the first three settings in the following table (BFD is optional):
Select to enable the OSPF protocol.
Reject Default Route
Select if you do not want to learn any default routes through OSPF.
Specify the router ID associated with the OSPF instance in this virtual router. The OSPF protocol uses the router ID to uniquely identify the OSPF instance.
To enable Bidirectional Forwarding Detection (BFD) for OSPFv3 globally for the virtual router on a PA-3000 Series, PA-5200 Series, PA-7000 Series, and VM-Series firewall, select one of the following:
Select None (Disable BFD) to disable BFD for all OSPFv3 interfaces on the virtual router; you cannot enable BFD for a single OSPFv3 interface.
In addition, configure OSPFv3 settings on the following tabs:
OSPF Network > Virtual Router > OSPF Configuring the Open Shortest Path First (OSPF) protocol requires you to configure the following general settings (except BFD, ...
Configure OSPFv3 OSPF supports both IPv4 and IPv6. You must use OSPFv3 if you are using IPv6. Configure general virtual router configuration settings. See Virtual ...
Configure BFD After you read the BFD Overview , which includes firewall models and interfaces supported, perform the following before configuring BFD: Configure one or ...
RIP Network > Virtual Routers > RIP Configuring the Routing Information Protocol (RIP) includes the following general settings: RIP Settings Description Enable Select to enable ...
BFD for Dynamic Routing Protocols
BFD for Dynamic Routing Protocols In addition to BFD for static routes, the firewall supports BFD for the BGP, OSPF, and RIP routing protocols. The ...
OSPFv3 Areas Tab
OSPFv3 Areas Tab Network > Virtual Router > OSPFv3 > Areas Use the following fields to configure OSPFv3 areas. OSPv3 – Areas Settings Description Authentication ...
OSPFv3 Export Rules Tab
OSPFv3 Export Rules Tab Network > Virtual Router > OSPFv3 > Export Rules Use the following fields to export OSPFv3 routes. OSPFv3 – Export Rules ...
Network > Network Profiles > BFD Profile
Network > Network Profiles > BFD Profile Bidirectional Forwarding Detection (BFD) enables extremely fast detection of a link failure, which accelerates failover to a different ...
OSPFv3 Advanced Tab
OSPFv3 Advanced Tab Network > Virtual Router > OSPFv3 > Advanced Use the following fields to disable transit routing for SPF calculations, configure OSPFv3 timers, ...