OSPFv3 Areas Tab
- Network > Virtual Router > OSPFv3 > Areas
Use the following fields to configure OSPFv3 areas.
OSPv3 – Areas Settings
Select the name of the Authentication profile that you want to specify for this OSPF area.
Select one of the following:
Click Add to aggregate LSA destination IPv6 addresses in the area by subnet. Enable or suppress advertising LSAs that match the subnet, and click OK. Repeat to add additional ranges.
Click Add and enter the following information for each interface to be included in the area, and click OK.
Configure the virtual link settings to maintain or enhance backbone area connectivity. The settings must be defined for area boarder routers, and must be defined within the backbone area (0.0.0.0). Click Add, enter the following information for each virtual link to be included in the backbone area, and click OK.
OSPF Areas Tab
OSPF Areas Tab Network > Virtual Router > OSPF > Areas The following fields describe the OSPF area settings: OSPF – Areas Settings Description Areas ...
Configure OSPFv3 OSPF supports both IPv4 and IPv6. You must use OSPFv3 if you are using IPv6. Configure general virtual router configuration settings. See Virtual ...
Configure OSPF OSPF determines routes dynamically by obtaining information from other routers and advertising routes to other routers by way of Link State Advertisements (LSAs). ...
OSPFv3 Advanced Tab
OSPFv3 Advanced Tab Network > Virtual Router > OSPFv3 > Advanced Use the following fields to disable transit routing for SPF calculations, configure OSPFv3 timers, ...
Configure OSPF Graceful Restart
Configure OSPF Graceful Restart OSPF Graceful Restart directs OSPF neighbors to continue using routes through a firewall during a short transition when it is out ...
OSPF Advanced Tab
OSPF Advanced Tab Network > Virtual Router > OSPF > Advanced The following fields describe RFC 1583 compatibility, OSPF timers, and graceful restart: OSPF – ...
OSPF Concepts The following topics introduce the OSPF concepts you must understand in order to configure the firewall to participate in an OSPF network: OSPFv3 ...
Configure BFD After you read the BFD Overview , which includes firewall models and interfaces supported, perform the following before configuring BFD: Configure one or ...
BFD for Dynamic Routing Protocols
BFD for Dynamic Routing Protocols In addition to BFD for static routes, the firewall supports BFD for the BGP, OSPF, and RIP routing protocols. The ...