Export Rules Tab
- Network > Virtual Router > OSPFv3 > Export Rules
Use the following fields to export OSPFv3 routes.
OSPFv3 – Export Rules Settings
Allow Redistribute Default Route
Select to permit redistribution of default routes through OSPF.
Select the name of a redistribution profile. The value must be an IP subnet or valid redistribution profile name.
New Path Type
Choose the metric type to apply.
Specify a tag for the matched route that has a 32-bit value.
Optional) Specify the route metric to be associated with the exported route and used for path selection (range is 1-65,535).
OSPF Export Rules Tab
OSPF Export Rules Tab Network > Virtual Router > OSPF > Export Rules The following table describes the fields to export OSPF routes: OSPF – ...
Configure OSPFv3 OSPF supports both IPv4 and IPv6. You must use OSPFv3 if you are using IPv6. Configure general virtual router configuration settings. See Virtual ...
Route Redistribution Network > Virtual Router > Redistribution Profiles Redistribution profiles direct the firewall to filter, set priority, and perform actions based on desired network ...
Route Redistribution Route redistribution on the firewall is the process of making routes that the firewall learned from one routing protocol (or a static or ...
OSPFv3 Network > Virtual Router > OSPFv3 Configuring the Open Shortest Path First v3 (OSPFv3) protocol requires configuring the first three settings in the following ...
BGP Redist Rules Tab
BGP Redist Rules Tab Network > Virtual Router > BGP > Redist Rules Configure the settings described in the following table to create rules for ...
RIP Export Rules Tab
RIP Export Rules Tab Network > Virtual Router > RIP > Export Rules RIP export rules allow you to control which routes the virtual router ...
Site-to-Site VPN with Static and Dynamic Routing
Site-to-Site VPN with Static and Dynamic Routing In this example, one site uses static routes and the other site uses OSPF. When the routing protocol ...