Configure Destination NAT Using Dynamic
Use Destination NAT to translate the original destination address to a destination host or server that has a dynamic IP address and uses an FQDN. Destination NAT using a dynamic IP address is especially helpful in cloud deployments, which typically use dynamic IP addressing. When the host or server in the cloud has new (dynamic) IP addresses, you don’t need to manually update the NAT policy rule by continuously querying the DNS server, nor do you need to use a separate, external component to update the DNS server with the latest FQDN-to-IP address mapping.
In the following example topology, clients want to reach servers that are hosting web applications in the cloud. An external Elastic Load Balancer (ELB) connects to firewalls, which connect to internal ELBs that connect to the servers. Over time, Amazon Web Services (AWS), for example, adds (and removes) IP addresses for the FQDN assigned to the internal ELBs based on the demand for services. The flexibility of using an FQDN for NAT to the internal ELB helps the policy to resolve to different IP addresses at different times, making destination NAT easier to use because the updates are dynamic.
- Create an address object using the FQDN of the server to which you want to translate the address. (The address object could also be an IP netmask or IP range.)
- SelectandObjectsAddressesAddan address object byName, such aspost-NAT-Internal-ELB.
- SelectFQDNas theTypeand enter the FQDN. In this example, the FQDN isielb.appweb.com.
- Create the destination NAT policy.
- SelectandPoliciesNATAdda NAT policy rule byNameon theGeneraltab.
- Selectipv4as theNAT Type.
- On theOriginal Packettab,AddtheSource ZoneandDestination Zone.
- On theTranslated Packettab, in the Destination Address Translation section, selectDynamic IP (with session distribution)as theTranslation Type.
- ForTranslated Address, select the address object you created for the FQDN, IP netmask, or IP range. In this example, the FQDN ispost-NAT-Internal-ELB.
- ForSession Distribution Method, select one of the following:
The firewall does not remove duplicate IP addresses from the list of destination IP addresses before it distributes sessions among the multiple IP addresses. The firewall distributes sessions to the duplicate addresses in the same way it distributes sessions to non-duplicate addresses. (Duplicate addresses in the translation pool can occur, for example, if the translated address is an address group of address objects, and one address object is an FQDN that resolves to an IP address, while another address object is a range that includes the same IP address.)
- Round Robin(default)—Assigns new sessions to IP addresses in rotating order. Unless you have a reason to change the distribution method, round robin distribution is likely suitable.
- Source IP Hash—Assigns new sessions based on hash of source IP address. If you have traffic coming from a single source IP address, don’t select Source IP Hash; select a different method.
- IP Modulo—The firewall takes into consideration the source and destination IP address from the incoming packet; the firewall performs an XOR operation and a modulo operation; the result determines to which IP address the firewall assigns new sessions.
- IP Hash—Assigns new sessions based on hash of source and destination IP addresses.
- Least Sessions—Assigns new sessions to the IP address with the fewest concurrent sessions. If you have many short-lived sessions,Least Sessionsprovides you with a more balanced distribution of sessions.
- Commityour changes.
- (Optional) You can configure the frequency at which the firewall refreshes an FQDN (Use Case 1: Firewall Requires DNS Resolution).
Recommended For You
Recommended videos not found.