By default, the
Dashboarddisplays widgets in a
3 Columnsbut you can customize the
Dashboardto display only
2 Columns, instead.
You can also decide which widgets to display or hide so that you see only those you want to monitor. To display a widget, select a widget category from the
Widgetsdrop-down and select a widget to add it to the Dashboard (widget names that appear in faded grayed-out text are already displayed). Hide (stop displaying) a widget by closing the widget ( in the widget header). The firewalls and Panorama save your widget display settings across logins (separately for each administrator).
Refer to the
Last updatedtimestamp to determine when the Dashboard data was last refreshed. You can manually refresh the entire
Dashboard( in the top right corner of the Dashboard) or you can refresh individual widgets ( within each widget header). Use the unlabeled drop-down next to the manual Dashboard refresh option ( ) to select the automatic refresh interval for the entire
2 mins, or
5 mins; to disable automatic refresh for the entire
Displays the applications with the most sessions. The block size indicates the relative number of sessions (mouse over the block to view the number), and the color indicates the security risk—from green (lowest) to red (highest). Click an application to view its application profile.
Top High Risk Applications
Similar to Top Applications except that it displays the highest-risk applications with the most sessions.
ACC Risk Factor
Displays the average risk factor (1-5) for the network traffic processed over the past week. Higher values indicate higher risk.
Displays the firewall or Panorama name and model, the Panorama CPU and RAM, the Panorama system mode, the PAN-OS® or Panorama software version, the IPv4 and IPv6 management IP information, the serial number, the CPU ID and UUID, the application, threat, and URL filtering definition versions, the current date and time, and the length of time since the last restart.
Indicates whether each interface is up (green), down (red), or in an unknown state (gray).
Displays the Management CPU usage, Data Plane usage, and the Session Count (the number of sessions established through the firewall or Panorama).
Shows configuration locks that administrators have set.
Logged In Admins
Displays the source IP address, session type (web interface or CLI), and session start time for each administrator who is currently logged in.
Displays the threat ID, application, and date and time for the last 10 entries in the Threat log. The threat ID is a malware description or URL that violates the URL filtering profile. Displays only entries from the last 60 minutes.
URL Filtering Logs
Displays the description and date and time for the last 60 minutes in the URL Filtering log.
Data Filtering Logs
Displays the description and date and time for the last 60 minutes in the Data Filtering log.
Displays the administrator username, client (web interface or CLI), and date and time for the last 10 entries in the Configuration log. Displays only entries from the last 60 minutes.
Displays the description and date and time for the last 10 entries in the System log.
A “Config installed” entry indicates configuration changes were committed successfully. Displays only entries from the last 60 minutes.
Recommended For You
Recommended videos not found.