Hardware Security Module Provider Configuration and Status
The Hardware Security Module Provider section shows
the HSM configuration settings and the connectivity status of the
HSM.
Hardware
Security Module Provider Status
Provider Configured
Select the HSM vendor configured on the
firewall:
None
SafeNet Network HSM
nCipher nShield Connect
High Availability
(
SafeNet Network only
) HSM high
availability is configured if checked.
High Availability Group Name
(
SafeNet Network only
) The group
name configured on the firewall for HSM high availability.
Firewall Source Address
The address of the port used for the HSM
service. By default this is the management port address. It can
be specified as a different port however through the Services Route
Configuration in
Device
Setup
Services
.
Master Key Secured by HSM
If checked, the master key is secured on
the HSM.
Status
Shows green if the firewall is connected
and authenticated to the HSM and shows red if the firewall is not
authenticated or if network connectivity to the HSM is down.