Routing

Routing connection test fields in the web interface.

Field	Description
Select Test	Select the connectivity test to execute.
(`Panorama only`) Select device	Select device/VSYS to specify which devices and virtual systems for which to test the policy functionality. Admin and device group & Template users are presented with the devices and virtual systems based on their access domain. Additionally, you can select the Panorama management server as a device.
(`Panorama only`) Selected Devices	Lists the devices and virtual systems selected for testing.
FiB Lookup, Mfib Lookup	Select one of the following for Lookup: FiB —Perform route lookup within activate route table Mfib —Perform multicast route lookup within active route table
Destination IP	Enter the IP address for which the traffic is intended .
Virtual Router	Specific virtual router within which the routing test is performed. Select the virtual router from the drop-down.
ECMP
Source IP	Enter the specific IP address from which the traffic originated.
Source Port	Enter the specific port from which the traffic originated.
Destination IP	Enter the specific IP address for which the traffic is intended.
Destination Port	Enter the specific destination port for which the traffic is intended.
Results	Select to view the Result Details of the executed test. (`Panorama only`) When executing the test for multiple managed devices, the Results display the following information for each device tested: Device Group—Name of the device group to which the firewall that is processing traffic belongs. Firewall—Name of the firewall that is processing traffic Status—Indicates the status of the test: Success or Failure . Result—Displays the test result. If the test could not be performed, one of the following is displayed: N/A —Test was not applicable to the device. Device not connected —Device connection was dropped.