LLDP Profile Settings
Specify a name for the LLDP profile.
Select the mode in which LLDP will function:
SNMP Syslog Notification
Enables SNMP trap and syslog notifications, which will occur at the global
Notification Interval. If enabled, the firewall will send both an SNMP trap and a syslog event as configured in the
SNMP Trap Profile
Enables the ifAlias object of the firewall to be sent in the Port Description TLV.
Enables the sysName object of the firewall to be sent in the System Name TLV.
Enables the sysDescr object of the firewall to be sent in the System Description TLV.
Enables the deployment mode (L3, L2, or virtual wire) of the interface to be sent, via the following mapping, in the System Capabilities TLV.
SNMP MIB will combine capabilities configured on interfaces into a single entry.
Management Addressto be sent in the Management Address TLV. You can enter up to four management addresses, which are sent in the order they are specified. To change the order, click
Specify a name for the Management Address.
Select an interface whose IP address will be the Management Address. If you select
None, you can enter an IP address in the field next to the IPv4 or IPv6 selection.
IPv6, and in the adjacent field, select or enter the IP address to be transmitted as the Management Address. At least one management address is required if
Management AddressTLV is enabled. If no management IP address is configured, the system uses the MAC address of the transmitting interface as the management address transmitted.