SD-WAN Target Tab

Target tab in the SD-WAN policy rule configuration window.
  • Policies
    SD-WAN
    Target
Select the
Target
tab to select the managed devices to which Panorama will push the SD-WAN policy rule. This tab is supported only on the Panorama management server.
Field
Description
Any (target all devices)
Enable (check) to push the SD-WAN policy rule to all devices managed by the Panorama management server.
Devices
  1. On the Devices tab, on the lefthand side, optionally select one or more filters to filter which items appear on the righthand side in the
    Name
    section.
  2. In the
    Name
    section, select one or more devices to which Panorama pushes the SD-WAN policy rule.
  3. Enable (check)
    Filter Selected
    to display only the devices that are selected and the count.
Tags
On the Tags tab,
Add
one or more
Tags
that were applied to devices. Panorama will push the SD-WAN rule to the devices tagged with the specified tags.
You can use either the
Devices
tab or the
Tags
tab to specify where Panorama pushes the rule, but not both.
Target to all but these specified devices and tags
Enable (check) to push the SD-WAN policy rule to all devices except for the selected
Devices
or devices with the specified
Tags
.

Recommended For You