Security policies allow you to enforce rules and take
action, and can be as general or specific as needed. The policy rules
are compared against the incoming traffic in sequence, and because
the first rule that matches the traffic is applied, the more specific
rules must precede the more general ones. For example, a rule for
a single application must precede a rule for all applications if
all other traffic-related settings are the same.
To ensure that end users authenticate when they try to
access your network resources, the firewall evaluates Authentication
policy before Security policy. For details, see Policies
For traffic that doesn’t match any user-defined rules, the default
rules apply. The default rules—displayed at the bottom of the security
rulebase—are predefined to allow all intrazone traffic (within the
zone) and deny all interzone traffic (between zones). Although these
rules are part of the pre-defined configuration and are read-only
by default, you can
them and change
a limited number of settings, including the tags, action (allow
or deny), log settings, and security profiles.
The interface includes the following tabs for defining Security
to configure a name and description for the Security policy rule.
to define the source zone or source address from which the traffic
to enforce policy for individual users or a group of users. If you
are using GlobalProtect™ with host information profile (HIP) enabled,
you can also base the policy on information collected by GlobalProtect.
For example, the user access level can be determined HIP that notifies
the firewall about the user's local configuration. The HIP information
can be used for granular access control based on the security programs
that are running on the host, registry values, and many other checks
such as whether the host has antivirus software installed.
to define the destination zone or destination address for the traffic.
to have the policy action occur based on an application or application
group. An administrator can also use an existing App-ID™ signature
and customize it to detect proprietary applications or to detect
specific attributes of an existing application. Custom applications
are defined in
tab to specify a specific TCP and/or UDP port
number or a URL category as match criteria in the policy.
to determine the action that will be taken based on traffic that
matches the defined policy attributes.
to view a rule’s usage, including the number of applications seen
on a rule, when the last new applications was seen on the rule,
hit count data, traffic over the past 30 days, and when the rule
was created and last edited.