Edit the Enterprise Data Loss Prevention (DLP) Data Filtering Settings

Edit the Enterprise Data Loss Prevention (DLP) data filtering settings to specify the actions the managed firewall takes on file scanned to the DLP cloud service.
Configure the network settings for files scanned to the Enterprise Data Loss Prevention (DLP) cloud service and specify the actions the firewall leveraging Enterprise DLP takes.
  1. Select
    Device
    Setup
    DLP
    and select the
    Template
    associated with the managed firewalls leveraging Enterprise DLP.
  2. Edit the Data Filtering Settings
    1. Specify the
      Max Latency (sec)
      for a file upload for an action is taken by the firewall.
    2. Specify the
      Action on Max Latency
      (
      Block
      or
      Allow
      ) the firewall takes when a file scanned to be stored in the DLP cloud service reaches the configured
      Max Latency
      .
      Selecting
      Block
      applies only to Enterprise DLP data filtering profiles configured to block files. This setting does not impact Enterprise DLP filtering profiles configured to alert when traffic containing sensitive data is scanned.
    3. Specify the
      Max File Size (MB)
      to enforce a maximum file size for files stored in the DLP cloud service.
    4. Specify the
      Action on Max File Size
      (
      Block
      or
      Allow
      ) the firewall takes when a file scanned to the DLP cloud service reaches the configured
      Max File Size
      .
      Selecting
      Block
      applies only to Enterprise DLP data filtering profiles configured to block files. This setting does not impact Enterprise DLP filtering profiles configured to alert when traffic containing sensitive data is scanned.
    5. Check (enable)
      Log Files Not Scanned
      to generate an alert in the data filtering log when a file cannot be scanned to the DLP cloud service.
    6. Click
      OK
      to save your configuration changes.
    enterprise-dlp-data-filtering-settings.png
  3. Commit and push your configuration changes to your managed firewalls leveraging Enterprise DLP.
    While a performing a
    Commit and Push
    is supported, it is not recommended for Enterprise DLP configuration changes and requires you to manually select the impacted templates and managed firewalls in the Push Scope Selection.
    1. Select
      Commit
      Commit to Panorama
      and
      Commit
      your configuration changes.
    2. Select
      Commit
      Push to Devices
      and
      Edit Selections
      .
    3. Select
      Device Groups
      and
      Include Device and Network Templates
      .
    4. Click
      OK
      .
    5. Push
      your configuration changes to your managed firewalls.

Recommended For You