Upgrade a ZTP Firewall

Automatically upgrade your a ZTP firewall.
After you successfully add a ZTP firewall to the Panorama™ management server, configure the target PAN-OS version of the ZTP firewall. Panorama checks whether PAN-OS version installed on the ZTP firewall is greater than or equal to the configured target PAN-OS version after it successfully connects to Panorama for the first time. If the PAN-OS version installed on the ZTP firewall is less than the target PAN-OS version, then the ZTP firewall enters an upgrade cycle until target PAN-OS version is installed.
  1. Select
    Panorama
    Device Deployment
    Updates
    and
    Check Now
    for the latest PAN-OS releases.
  2. Select
    Panorama
    Managed Devices
    Summary
    and select one or more ZTP firewalls.
  3. Reassociate
    the selected ZTP firewall(s).
  4. In the
    To SW Version
    column, select the target PAN-OS version for the ZTP firewall.
  5. Click
    OK
    to save your configuration changes.
    ztp-to-sw-version.png
  6. Select
    Commit
    and
    Commit and Push
    your configuration changes.
  7. Verify the ZTP firewall software upgrade.
    1. Select
      Panorama
      Managed Devices
      Summary
      and navigate to the ZTP firewall(s).
    2. Verify the
      Software Version
      column displays the correct target PAN-OS release.

Recommended For You