Configure RADIUS Authentication for a WildFire Cluster
Configure RADIUS authentication for all WildFire appliance in a WildFire cluster.
Use a RADIUS server to authenticate administrative access to the CLI of the WildFire appliances in a WildFire cluster. You can also define Vendor-Specific Attributes (VSAs) on the RADIUS server to manage administrator authorization. Using VSAs enables you to quickly change the roles, access domains, and user groups of administrators through your directory service, which is often easier than reconfiguring settings on the Panorama™ management server.
- Configure RADIUS authentication.Administrator accounts configured for RADIUS authentication are required to have Superuser admin role privileges to successfully configure authentication for Wildfire appliances in the WildFire cluster.
- Add a RADIUS server profile.The profile defines how the WildFire appliances in the WildFire clust connect to the RADIUS server.
- SelectandPanoramaServer ProfilesRADIUSAdda profile.
- Enter aProfile Nameto identify the server profile.
- Enter aTimeoutinterval in seconds after which an authentication request times out (default is 3; range is 1–20).
- Select theAuthentication Protocol(default isCHAP) that a WildFire appliance uses to authenticate to the RADIUS server.SelectCHAPif the RADIUS server supports that protocol; it is more secure thanPAP.
- Addeach RADIUS server and enter the following:
- Nameto identify the server.
- RADIUS ServerIP address or FQDN.
- Secret/Confirm Secret(a key to encrypt usernames and passwords).
- ServerPortfor authentication requests (default is 1812).
- ClickOKto save the server profile.
- Assign the RADIUS server profile to an authentication profile.The authentication profile defines authentication settings that are common to a set of administrators.
- SelectandPanoramaAuthentication ProfileAdda profile.
- Enter aNameto identify the authentication profile.
- Set theTypetoRADIUS.
- Select theServer Profileyou configured.
- SelectRetrieve user group from RADIUSto collect user group information from VSAs defined on the RADIUS server.Panorama matches the group information against the groups you specify in the Allow List of the authentication profile.
- SelectAdvancedand, in the Allow List,Addthe administrators that are allowed to authenticate with this authentication profile.
- ClickOKto save the authentication profile.
- Configure the authentication for the WildFire cluster.
- Selectand select the WildFire cluster you previously added.PanoramaManaged WildFire Clusters
- Select theAuthentication Profileyou configured in the previous step.If a global authentication profile is not assigned you must assign an authentication profile to each individual local administrator to leverage remote authentication.
- Configure the authenticationTimeout Configurationfor a WildFire appliance.
- Enter the number ofFailed Attempts before a user is locked out of a WildFire appliance CLI.
- Enter theLockout Time, in minutes, for which a WildFire appliance locks out a user account after that user reaches the configured number ofFailed Attempts.
- Enter theIdle Timeout, in minutes, before the user account is automatically logged out due to inactivity.
- Enter theMax Session Countto set how many user accounts can simultaneously access a WildFire appliance.
- Enter theMax Session Timethe administrator can be logged in before being automatically logged out.
- Add the WildFire appliance administrators.Administrators may either be added as a local administrator or as an imported Panorama administrator—but not both. Adding the same administrator as both a local administrator and as an imported Panorama administrator is not supported and causes the Panorama commit to fail. For example, the commit to Panorama fails if you addadmin1as both a local and Panorama administrator.
- Addand configure new administrators unique to the WildFire appliances in the WildFire cluster. These administrators are specific to the WildFire appliances in the WildFire cluster for which they are created and you manage these administrators from this table.
- Addany administrators configured on Panorama. These administrators are created on Panorama and imported to the WildFire appliances in the WildFire cluster.
- ClickOKto save the WildFire cluster authentication configuration.
- Commitand thenCommit and Pushyour configuration changes.
- Access the WildFire appliance CLI to verify you can successfully access a WildFire appliance using the local admin user.
Recommended For You
Recommended videos not found.