Preview, Validate, or Commit Configuration Changes
Table of Contents
11.1 & Later
Expand all | Collapse all
-
- Determine Panorama Log Storage Requirements
-
- Setup Prerequisites for the Panorama Virtual Appliance
- Perform Initial Configuration of the Panorama Virtual Appliance
- Set Up The Panorama Virtual Appliance as a Log Collector
- Set Up the Panorama Virtual Appliance with Local Log Collector
- Set up a Panorama Virtual Appliance in Panorama Mode
- Set up a Panorama Virtual Appliance in Management Only Mode
-
- Preserve Existing Logs When Adding Storage on Panorama Virtual Appliance in Legacy Mode
- Add a Virtual Disk to Panorama on an ESXi Server
- Add a Virtual Disk to Panorama on vCloud Air
- Add a Virtual Disk to Panorama on Alibaba Cloud
- Add a Virtual Disk to Panorama on AWS
- Add a Virtual Disk to Panorama on Azure
- Add a Virtual Disk to Panorama on Google Cloud Platform
- Add a Virtual Disk to Panorama on KVM
- Add a Virtual Disk to Panorama on Hyper-V
- Add a Virtual Disk to Panorama on Oracle Cloud Infrastructure (OCI)
- Mount the Panorama ESXi Server to an NFS Datastore
-
- Increase CPUs and Memory for Panorama on an ESXi Server
- Increase CPUs and Memory for Panorama on vCloud Air
- Increase CPUs and Memory for Panorama on Alibaba Cloud
- Increase CPUs and Memory for Panorama on AWS
- Increase CPUs and Memory for Panorama on Azure
- Increase CPUs and Memory for Panorama on Google Cloud Platform
- Increase CPUs and Memory for Panorama on KVM
- Increase CPUs and Memory for Panorama on Hyper-V
- Increase the CPUs and Memory for Panorama on Oracle Cloud Infrastructure (OCI)
- Complete the Panorama Virtual Appliance Setup
-
- Convert Your Evaluation Panorama to a Production Panorama with Local Log Collector
- Convert Your Evaluation Panorama to a Production Panorama without Local Log Collector
- Convert Your Evaluation Panorama to VM-Flex Licensing with Local Log Collector
- Convert Your Evaluation Panorama to VM-Flex Licensing without Local Log Collector
- Convert Your Production Panorama to an ELA Panorama
-
- Register Panorama
- Activate a Panorama Support License
- Activate/Retrieve a Firewall Management License when the Panorama Virtual Appliance is Internet-connected
- Activate/Retrieve a Firewall Management License when the Panorama Virtual Appliance is not Internet-connected
- Activate/Retrieve a Firewall Management License on the M-Series Appliance
- Install the Panorama Device Certificate
- Install the Device Certificate for a Dedicated Log Collector
-
- Migrate from a Panorama Virtual Appliance to an M-Series Appliance
- Migrate a Panorama Virtual Appliance to a Different Hypervisor
- Migrate from an M-Series Appliance to a Panorama Virtual Appliance
- Migrate from an M-500 Appliance to an M-700 Appliance
- Migrate from an M-600 Appliance to an M-700 Appliance
- Migrate from an M-100 Appliance to an M-500 Appliance
- Migrate from an M-100 or M-500 Appliance to an M-200 or M-600 Appliance
-
- Configure an Admin Role Profile
- Configure an Admin Role Profile for Selective Push to Managed Firewalls
- Configure an Access Domain
-
- Configure a Panorama Administrator Account
- Configure Local or External Authentication for Panorama Administrators
- Configure a Panorama Administrator with Certificate-Based Authentication for the Web Interface
- Configure an Administrator with SSH Key-Based Authentication for the CLI
- Configure RADIUS Authentication for Panorama Administrators
- Configure TACACS+ Authentication for Panorama Administrators
- Configure SAML Authentication for Panorama Administrators
- Enable SCP Uploads for an Administrator
- Configure Tracking of Administrator Activity
-
- Add a Firewall as a Managed Device
- Change Between Panorama Management and Cloud Management
-
- Add a Device Group
- Create a Device Group Hierarchy
- Create Objects for Use in Shared or Device Group Policy
- Revert to Inherited Object Values
- Manage Unused Shared Objects
- Manage Precedence of Inherited Objects
- Move or Clone a Policy Rule or Object to a Different Device Group
- Push a Policy Rule to a Subset of Firewalls
- Device Group Push to a Multi-VSYS Firewall
- Manage the Rule Hierarchy
- Manage the Master Key from Panorama
- Schedule a Configuration Push to Managed Firewalls
- Redistribute Data to Managed Firewalls
-
- Plan the Transition to Panorama Management
- Migrate a Firewall to Panorama Management and Reuse Existing Configuration
- Migrate a Firewall to Panorama Management and Push a New Configuration
- Migrate a Firewall HA Pair to Panorama Management and Reuse Existing Configuration
- Migrate a Firewall HA Pair to Panorama Management and Push a New Configuration
- Load a Partial Firewall Configuration into Panorama
- Localize a Panorama Pushed Configuration on a Managed Firewall
-
- Configure a Managed Collector
- Monitor Managed Collector Health Status
- Configure Log Forwarding to Panorama
- Configure Syslog Forwarding to External Destinations
- Forward Logs to Strata Logging Service
- Verify Log Forwarding to Panorama
- Modify Log Forwarding and Buffering Defaults
- Configure Log Forwarding from Panorama to External Destinations
-
- Add Standalone WildFire Appliances to Manage with Panorama
- Remove a WildFire Appliance from Panorama Management
-
-
- Configure a Cluster and Add Nodes on Panorama
- Configure General Cluster Settings on Panorama
- Remove a Cluster from Panorama Management
- Configure Appliance-to-Appliance Encryption Using Predefined Certificates Centrally on Panorama
- Configure Appliance-to-Appliance Encryption Using Custom Certificates Centrally on Panorama
- View WildFire Cluster Status Using Panorama
-
-
- Preview, Validate, or Commit Configuration Changes
- Commit Selective Configuration Changes for Managed Devices
- Push Selective Configuration Changes to Managed Devices
- Enable Automated Commit Recovery
- Compare Changes in Panorama Configurations
- Manage Locks for Restricting Configuration Changes
- Add Custom Logos to Panorama
- Use the Panorama Task Manager
- Reboot or Shut Down Panorama
- Configure Panorama Password Profiles and Complexity
-
-
- Verify Panorama Port Usage
- Resolve Zero Log Storage for a Collector Group
- Replace a Failed Disk on an M-Series Appliance
- Replace the Virtual Disk on an ESXi Server
- Replace the Virtual Disk on vCloud Air
- Migrate Logs to a New M-Series Appliance in Log Collector Mode
- Migrate Logs to a New M-Series Appliance in Panorama Mode
- Migrate Logs to a New M-Series Appliance Model in Panorama Mode in High Availability
- Migrate Logs to the Same M-Series Appliance Model in Panorama Mode in High Availability
- Migrate Log Collectors after Failure/RMA of Non-HA Panorama
- Regenerate Metadata for M-Series Appliance RAID Pairs
- View Log Query Jobs
- Troubleshoot Registration or Serial Number Errors
- Troubleshoot Reporting Errors
- Troubleshoot Device Management License Errors
- Troubleshoot Automatically Reverted Firewall Configurations
- View Task Success or Failure Status
- Generate a Stats Dump File for a Managed Firewall
- Recover Managed Device Connectivity to Panorama
- Restore an Expired Device Certificate
Preview, Validate, or Commit Configuration Changes
You can perform Panorama Commit, Validation, and Preview Operations on
pending changes to the Panorama configuration and then push those
changes to the devices that Panorama manages, including firewalls,
Log Collectors, and WildFire appliances and appliance clusters.
You can filter the pending changes by administrator or location and
then commit, push, validate, or preview only those changes. The
locations can be specific device groups, templates, Collector Groups,
Log Collectors, shared settings, or the Panorama management server.
Because Panorama pushes its running configuration, you cannot push changes to devices until you
first commit them to Panorama. If the changes are not ready to activate on devices,
you can select to commit the changes to the Panorama configuration without pushing
them to devices. Later, when the changes are ready to activate on devices, you can
select . If the changes are ready to activate on both Panorama and the
devices, select as described in the following procedure.
Commit
Commit to Panorama
Commit
Push to Devices
Commit
Commit and Push
(
Device Groups only
) When you make a configuration change to a parent device group, pushing these changes to managed firewalls
associated with its child device groups is supported only from the Panorama web interface. In this instance, device group
configuration changes pushed from the Panorama CLI are pushed only to managed firewalls
directly associated with the impacted device group and not to any managed
firewalls associated with its child device groups. Child device groups are
selected by default when you push a device group configuration change for a
parent device group from the Panorama web interface and are not included by
default when you push from the Panorama CLI. For example, you create
ParentDG1
with two firewall
associated and its ChildDG2
with two different
managed firewalls associated. You make configuration changes to
ParentDG1
. In this scenario,
Push to Devices
and Commit
and Push
from the Panorama web interface successfully push the
ParentDG1
changes to all four firewalls.
However, the commit-all
operation from the Panorama CLI
pushes only to managed firewalls associated with
ParentDG1
.- Configure the scope of configuration changes that you will commit, validate, or preview.
- ClickCommitat the top of the web interface.
- Select one of the following options:
- Commit All Changes(default)—Applies the commit to all changes for which you have administrative privileges. You cannot manually filter the commit scope when you select this option. Instead, the administrator role assigned to the account you used to log in determines the commit scope.
- Commit Changes Made By—Enables you to filter the commit scope by administrator or location. The administrative role assigned to the account you used to log in determines which changes you can filter.
To commit the changes of other administrators, the account you used to log in must be assigned the Superuser role or an Admin Role profile with theCommit For Other Adminsprivilege enabled. - (Optional) To filter the commit scope by administrator, selectCommit Changes Made By, click the adjacent link, select the administrators, and clickOK.
- (Optional) To filter by location, selectCommit Changes Made Byand clear any changes that you want to exclude from the Commit Scope.If dependencies between the configuration changes you included and excluded cause a validation error, perform the commit with all the changes included. For example, when you commit changes to a device group, you must include the changes of all administrators who added, deleted, or repositioned rules for the same rulebase in that device group.
- Preview the changes that the commit will activate.When you preview changes after you delete and then re-add the same device to a policy rule, Panorama displays that same device as both deleted in the running configuration and as added in the candidate configuration. Additionally, the order of devices in the device target list in the running configuration may then be different from the candidate configuration and display as a change when you preview changes even when there aren't any configuration changes.This can be useful if, for example, you don’t remember all your changes and you’re not sure you want to activate all of them.Panorama compares the configurations you selected in the Commit Scope to the running configuration. The preview window displays the configurations side-by-side and uses color coding to indicate which changes are additions (green), modifications (yellow), or deletions (red).Preview Changesand select theLines of Context, which is the number of lines from the compared configuration files to display before and after the highlighted differences. These lines help you correlate the preview output to settings in the web interface. Close the preview window when you finish reviewing the changes.After you upgrade Panorama to PAN-OS 10.1 or later release,Preview Changesshows that HIP Profiles calledsource-hip-anyanddestination-hip-anywere added to each Security policy rule for any managed firewall running PAN-OS 9.1 or earlier release instead ofhip-profiles-any. This is due to a change to the XML file Panorama uses to compare the running and candidate configurations in PAN-OS 10.0 and later releases. You can ignore this error as the push will succeed.Because the preview results display in a new window, your browser must allow pop-up windows. If the preview window does not open, refer to your browser documentation for the steps to unblock pop-up windows.
- Preview the individual settings for which you are committing changes.This can be useful if you want to know details about the changes, such as the types of settings and who changed them.
- ClickChange Summary.
- (Optional)Group Bya column name (such as theTypeof setting).
- Closethe Change Summary dialog when you finish reviewing the changes.
- Validate the changes before committing to ensure the commit will succeed.
- Validate Changes.The results display all the errors and warnings that an actual commit would display.
- Resolve any errors that the validation results identify.
- (Optional) Modify the Push Scope.By default, the Push Scope includes all locations with changes that require a Panorama commit.If you select, the push scope includes all locations associated with devices that are out of sync with the Panorama running configuration.CommitPush to Devices
- No Default Selectionsto manually select specific devices. The default devices Panorama pushes to are based on the impacted device group and template configuration changes.
- Edit Selectionsto modify the push scope:
- Device Groups—Select device groups or individual firewalls or virtual systems.
- Templates—Select templates, template stacks, or individual firewalls.
- Collector Groups—Select Collector Groups.
- Merge with Device Candidate Config—This setting is enabled by default and merges any pending local firewall configurations with the configuration push from Panorama. The local firewall configuration is merged and committed regardless of the admin pushing the changes from Panorama or the admin who made the local firewall configuration changes.Disable this setting if you manage and commit local firewall configuration changes independently of the Panorama managed configuration.
- ClickOKto save your changes to the Push Scope.
- Validate the changes you will push to device groups or templates.
- Validate Device Group PushorValidate Template Push.The results display all the errors and warnings that an actual push operation would display.
- Resolve any errors that the validation results identify.
- Commit your changes to Panorama and push the changes to devices.Commit and Pushthe configuration changes.Use the Panorama Task Manager to see details about commits that are pending (optionally, you can cancel these), in progress, completed, or failed.
- Verify the configuration push from Panorama was successful.
- Run one of the following commands.admin>show config pushed-templateadmin>show config mergedTheshowcommands for specific configuration objects are designed to show only the local firewall configuration and not the Panorama-pushed configuration.For example, theshow network virtual routercommand ran on the firewall CLI shows only the virtual router configuration local to the firewall and does not show the Panorama-pushed virtual router configuration.