Redistribute Data to Managed Firewalls
Table of Contents
11.1 & Later
Expand all | Collapse all
-
- Determine Panorama Log Storage Requirements
-
- Setup Prerequisites for the Panorama Virtual Appliance
- Perform Initial Configuration of the Panorama Virtual Appliance
- Set Up The Panorama Virtual Appliance as a Log Collector
- Set Up the Panorama Virtual Appliance with Local Log Collector
- Set up a Panorama Virtual Appliance in Panorama Mode
- Set up a Panorama Virtual Appliance in Management Only Mode
-
- Preserve Existing Logs When Adding Storage on Panorama Virtual Appliance in Legacy Mode
- Add a Virtual Disk to Panorama on an ESXi Server
- Add a Virtual Disk to Panorama on vCloud Air
- Add a Virtual Disk to Panorama on Alibaba Cloud
- Add a Virtual Disk to Panorama on AWS
- Add a Virtual Disk to Panorama on Azure
- Add a Virtual Disk to Panorama on Google Cloud Platform
- Add a Virtual Disk to Panorama on KVM
- Add a Virtual Disk to Panorama on Hyper-V
- Add a Virtual Disk to Panorama on Oracle Cloud Infrastructure (OCI)
- Mount the Panorama ESXi Server to an NFS Datastore
-
- Increase CPUs and Memory for Panorama on an ESXi Server
- Increase CPUs and Memory for Panorama on vCloud Air
- Increase CPUs and Memory for Panorama on Alibaba Cloud
- Increase CPUs and Memory for Panorama on AWS
- Increase CPUs and Memory for Panorama on Azure
- Increase CPUs and Memory for Panorama on Google Cloud Platform
- Increase CPUs and Memory for Panorama on KVM
- Increase CPUs and Memory for Panorama on Hyper-V
- Increase the CPUs and Memory for Panorama on Oracle Cloud Infrastructure (OCI)
- Complete the Panorama Virtual Appliance Setup
-
- Convert Your Evaluation Panorama to a Production Panorama with Local Log Collector
- Convert Your Evaluation Panorama to a Production Panorama without Local Log Collector
- Convert Your Evaluation Panorama to VM-Flex Licensing with Local Log Collector
- Convert Your Evaluation Panorama to VM-Flex Licensing without Local Log Collector
- Convert Your Production Panorama to an ELA Panorama
-
- Register Panorama
- Activate a Panorama Support License
- Activate/Retrieve a Firewall Management License when the Panorama Virtual Appliance is Internet-connected
- Activate/Retrieve a Firewall Management License when the Panorama Virtual Appliance is not Internet-connected
- Activate/Retrieve a Firewall Management License on the M-Series Appliance
- Install the Panorama Device Certificate
- Install the Device Certificate for a Dedicated Log Collector
-
- Migrate from a Panorama Virtual Appliance to an M-Series Appliance
- Migrate a Panorama Virtual Appliance to a Different Hypervisor
- Migrate from an M-Series Appliance to a Panorama Virtual Appliance
- Migrate from an M-500 Appliance to an M-700 Appliance
- Migrate from an M-600 Appliance to an M-700 Appliance
- Migrate from an M-100 Appliance to an M-500 Appliance
- Migrate from an M-100 or M-500 Appliance to an M-200 or M-600 Appliance
-
- Configure an Admin Role Profile
- Configure an Admin Role Profile for Selective Push to Managed Firewalls
- Configure an Access Domain
-
- Configure a Panorama Administrator Account
- Configure Local or External Authentication for Panorama Administrators
- Configure a Panorama Administrator with Certificate-Based Authentication for the Web Interface
- Configure an Administrator with SSH Key-Based Authentication for the CLI
- Configure RADIUS Authentication for Panorama Administrators
- Configure TACACS+ Authentication for Panorama Administrators
- Configure SAML Authentication for Panorama Administrators
- Enable SCP Uploads for an Administrator
- Configure Tracking of Administrator Activity
-
- Add a Firewall as a Managed Device
- Change Between Panorama Management and Cloud Management
-
- Add a Device Group
- Create a Device Group Hierarchy
- Create Objects for Use in Shared or Device Group Policy
- Revert to Inherited Object Values
- Manage Unused Shared Objects
- Manage Precedence of Inherited Objects
- Move or Clone a Policy Rule or Object to a Different Device Group
- Push a Policy Rule to a Subset of Firewalls
- Device Group Push to a Multi-VSYS Firewall
- Manage the Rule Hierarchy
- Manage the Master Key from Panorama
- Schedule a Configuration Push to Managed Firewalls
- Redistribute Data to Managed Firewalls
-
- Plan the Transition to Panorama Management
- Migrate a Firewall to Panorama Management and Reuse Existing Configuration
- Migrate a Firewall to Panorama Management and Push a New Configuration
- Migrate a Firewall HA Pair to Panorama Management and Reuse Existing Configuration
- Migrate a Firewall HA Pair to Panorama Management and Push a New Configuration
- Load a Partial Firewall Configuration into Panorama
- Localize a Panorama Pushed Configuration on a Managed Firewall
-
- Configure a Managed Collector
- Monitor Managed Collector Health Status
- Configure Log Forwarding to Panorama
- Configure Syslog Forwarding to External Destinations
- Forward Logs to Strata Logging Service
- Verify Log Forwarding to Panorama
- Modify Log Forwarding and Buffering Defaults
- Configure Log Forwarding from Panorama to External Destinations
-
- Add Standalone WildFire Appliances to Manage with Panorama
- Remove a WildFire Appliance from Panorama Management
-
-
- Configure a Cluster and Add Nodes on Panorama
- Configure General Cluster Settings on Panorama
- Remove a Cluster from Panorama Management
- Configure Appliance-to-Appliance Encryption Using Predefined Certificates Centrally on Panorama
- Configure Appliance-to-Appliance Encryption Using Custom Certificates Centrally on Panorama
- View WildFire Cluster Status Using Panorama
-
-
- Preview, Validate, or Commit Configuration Changes
- Commit Selective Configuration Changes for Managed Devices
- Push Selective Configuration Changes to Managed Devices
- Enable Automated Commit Recovery
- Compare Changes in Panorama Configurations
- Manage Locks for Restricting Configuration Changes
- Add Custom Logos to Panorama
- Use the Panorama Task Manager
- Reboot or Shut Down Panorama
- Configure Panorama Password Profiles and Complexity
-
-
- Verify Panorama Port Usage
- Resolve Zero Log Storage for a Collector Group
- Replace a Failed Disk on an M-Series Appliance
- Replace the Virtual Disk on an ESXi Server
- Replace the Virtual Disk on vCloud Air
- Migrate Logs to a New M-Series Appliance in Log Collector Mode
- Migrate Logs to a New M-Series Appliance in Panorama Mode
- Migrate Logs to a New M-Series Appliance Model in Panorama Mode in High Availability
- Migrate Logs to the Same M-Series Appliance Model in Panorama Mode in High Availability
- Migrate Log Collectors after Failure/RMA of Non-HA Panorama
- Regenerate Metadata for M-Series Appliance RAID Pairs
- View Log Query Jobs
- Troubleshoot Registration or Serial Number Errors
- Troubleshoot Reporting Errors
- Troubleshoot Device Management License Errors
- Troubleshoot Automatically Reverted Firewall Configurations
- View Task Success or Failure Status
- Generate a Stats Dump File for a Managed Firewall
- Recover Managed Device Connectivity to Panorama
- Restore an Expired Device Certificate
Redistribute Data to Managed Firewalls
To ensure all the firewalls that enforce policies
and generate reports have the required data and authentication timestamps for your policy
rules, you can leverage your Panorama infrastructure to redistribute
the mappings and timestamps.
- Configure the Panorama management server to redistribute data.
- Add firewalls, virtual systems, or Windows User-ID agents as redistribution agents to Panorama:
- SelectandPanoramaData RedistributionAddeach redistribution agent.
- Enter aNameto identify the redistribution agent.
- Confirm that the agent isEnabled.
- Enter theHostname or IP address of the MGT interface on firewall.
- Enter thePortnumber on which the firewall will listen for data redistribution queries (default is 5007).
- If the redistribution agent is a firewall or virtual system, enter theCollector NameandCollector Pre-Shared Key.
- Select theData typethat you want to redistribute. You can select all data types, but you must select at least one of the following data types:
- IP User Mappings
- IP Tags
- User Tags
- HIP
- Quarantine List
- ClickOKto save the configuration.
- Enable the Panorama MGT interface to respond to data redistribution queries from firewalls:If the Panorama management server has a high availability (HA) configuration, perform this step on each HA peer as a best practice so that redistribution continues if Panorama fails over.
- SelectandPanoramaSetupInterfacesManagement.
- SelectUser-IDin the Network Services section and clickOK.
- Selectto activate your changes on Panorama.CommitCommit to Panorama
- Configure firewalls to receive data that Panorama redistributes.
- Selectthen select theDeviceData RedistributionAgentsTemplateto which the firewalls are assigned.
- Addan agent and enter aName.
- Select how you want to add the agent:
- Serial Number—Select theSerial Numberof the Panorama you want to use from the list:
- panorama—The active or solitary Panorama
- panorama2—(HA only) The passive Panorama
- Host and Port—Specify the following information:
- Select theHostname or IP address of the MGT interface on firewall.
- Select whether the host is anLDAP Proxy.
- Enter thePortnumber on which the firewall will listen for data redistribution queries (default is 5007).
- If the redistribution agent is a firewall or virtual system, enter theCollector NameandCollector Pre-Shared Key.
- Select theData typethat you want to redistribute.
- Confirm that the agent isEnabledand clickOKto save the configuration.
- Selectto activate your changes on Panorama and push the changes to the firewalls.CommitCommit and Push
- Verify that Panorama and firewalls receive redistributed data.
- View the agent statisticsand selectPanoramaData RedistributionAgentsStatusto view a summary of the activity for the redistribution agent, such as the number of mappings that the client firewall has received.
- Confirm theSource Namein the User-ID logs () to verify that the firewall receives the mappings from the redistribution agents.MonitorLogsUser-ID
- View the IP-Tag log () to confirm that the client firewall receives data.MonitorLogsIP-Tag
- Access the CLI of a firewall or Panorama management server that redistributes data.
- Display all the user mappings by running the following command:>show user ip-user-mapping all
- Record the IP address associated with any one username.
- Access the CLI of a firewall or Panorama management server that receives redistributed data.
- Display the mapping information and authentication timestamp for the<IP-address>you recorded:>show user ip-user-mapping ipIP address: 192.0.2.0 (vsys1) User: corpdomain\username1 From: UIA Idle Timeout: 10229s Max. TTL: 10229s MFA Timestamp: first(1) - 2016/12/09 08:35:04 Group(s): corpdomain\groupname(621)<IP-address>This example output shows the timestamp for a response to one authentication challenge (factor). For Authentication rules that use multi-factor authentication (MFA), the output shows multiple timestamps.