End-of-Life (EoL)
Create a Device Group Hierarchy
Plan the Device Group Hierarchy. Decide the device group levels, and which firewalls and virtual systems you will assign to each device group and the Shared location. You can assign any one firewall or virtual system (vsys) to only one device group. If a device group will be just an organizational container for lower level device groups, you don’t need to assign firewalls to it. Remove firewall or vsys assignments from existing device groups if those assignments don’t fit your planned hierarchy. Select Panorama > Device Groups and select the device group. In the Devices section, clear the check boxes of firewalls and virtual systems you want to remove, and click OK. If necessary, add more firewalls that you will assign to device groups: see Add a Firewall as a Managed Device.
For each top-level device group, Add a Device Group. In the Panorama > Device Groups page, click Add and enter a Name to identify the device group. In the Devices section, select check boxes to assign firewalls and virtual systems to the device group. Leave the Parent Device Group option at Shared (the default) and click OK.
For each lower-level device group, Add a Device Group. For new device groups at each lower level, repeat Step 2 but set the Parent Device Group to a device group at the next level above. For each existing device group, in the Device Groups page, select the device group to edit it, select a Parent Device Group, and click OK. If you move a device group to a different parent, all its descendant device groups move with it, along with all firewalls, policy rules, and objects associated with the device group and its descendants. If the new parent is in another access domain, the moved device group will no longer have membership in the original access domain. If the new access domain has read-write access for the parent device group, it will also have read-write access for the moved device group. If the new access domain has read-only access for the parent, it will have no access for the moved device group. To reconfigure access for device groups, see Configure an Access Domain.
Configure, move, and clone objects and policy rules as needed to account for inheritance in the device group hierarchy. Create Objects for Use in Shared or Device Group Policy, or edit existing objects. You can edit objects only at their location: the device group to which they are assigned. Descendant device groups inherit read-only instances of the objects from that location. However, you can optionally Override inherited object values. Create or edit policies. Move or Clone a Policy Rule or Object to a Different Device Group.
Override inherited object values. Applicable only if object values in a particular device group must differ from the values inherited from an ancestor device group. After overriding an object, you can override it again in descendant device groups. However, you can never override shared or predefined (default) objects. In the Objects tab, inherited objects have a green icon in the Name column, and the Location column displays the ancestor device group. In the Objects tab, select the object type (for example, Objects > Addresses). Select the Device Group that will have the override instance. Select the object and click Override. Edit the values. You can’t edit the Name or Shared settings. Click OK. The Name column displays a yellow-overlapping-green icon for the object to indicate it is overridden. If necessary, you can later Revert to Inherited Object Values.
Save and commit your changes. Perform a Panorama and device group commit after any change to the hierarchy. You must also perform a template commit if a template references objects in a device group (for example, interfaces referencing addresses), and a firewall assigned to the template is no longer assigned to that device group because of a hierarchy change. Click Commit, for the Commit Type select Panorama, and click Commit again. Click Commit, for the Commit Type select Device Group, select all the device groups you added or changed, and click Commit again.

Recommended For You