End-of-Life (EoL)

Add a Virtual Disk to Panorama on vCloud Air

To expand log storage capacity on the Panorama virtual appliance, you can add virtual logging disks. If the appliance is in Panorama mode, you can add 1 to 12 virtual logging disks of 2TB each, for a maximum total of 24TB. If the appliance is in Legacy mode, you can add one virtual logging disk of up to 8TB.
If Panorama loses connectivity to the new virtual disk, Panorama might lose logs during the failure interval.
  1. Add additional disks to Panorama.
    In all modes, the first logging disk on the Panorama VM must be at least 2TB in order to add additional disks. If the first logging disk is less than 2TB, you will be unable to add additional disk space.
    1. Access the vCloud Air web console and select your
      Virtual Private Cloud On Demand
    2. Select the Panorama virtual appliance in the
      Virtual Machines
    3. Select
      Edit Resources
      Add another disk
    4. Set the
      size. If the Panorama virtual appliance is in Panorama mode, set the size to at least 2TB. If the appliance is in Legacy mode, you can set the size to as much as 8TB.
      In Panorama mode, you can add disk sizes larger than 2TB and Panorama will automatically create as many 2TB partitions as possible. For example, if disk sdc was 24TB, it will create 12 2TB partitions. These disks will be named sdc1-12.
    5. Set the storage tier to
    6. Repeat Step c and Step d to add additional disks to the Panorama virtual appliance if necessary.
    7. Save
      your changes.
  2. Configure each disk.
    The following example uses the sdc virtual disk.
    1. Enter the following command to view the disks on the Panorama virtual appliance:
      show system disk details
      The user will see the following response:
      Name : sdb State : Present Size : 2048 MB Status : Available Reason : Admin enabled Name : sdc State : Present Size : 2048 MB Status : Available Reason : Admin disabled
    2. Enter the following command and confirm the request when prompted for all disks with the
      Reason : Admin disabled
      request system disk add sdc
    3. Enter the
      show system disk details
      command to monitor the status of the disk addition. Continue to next step when all newly added disk responses display
      Reason : Admin enabled
  3. Make disks available for logging.
    1. Log in to the Panorama web interface.
    2. Select
      Managed Collectors
      and edit the Log Collector.
    3. Select
      and Add each newly added disk.
    4. Click
    5. Select
      Commit and Push
      Commit and Push
      your changes.
  4. Configure Panorama to receive logs.
    This step is intended for new Panorama deployments in Panorama mode. If you are adding logging disks to an existing virtual Panorama appliance, continue to the next step.
  5. Verify that the Panorama Log Storage capacity has been increased.
    1. Log in to the Panorama web interface.
    2. Select
      Collector Groups
      and select the Collector Group that the virtual Panorama appliance belongs to.
    3. Verify that the
      Log Storage
      capacity accurately displays the disk capacity.

Recommended For You