Create a Device Group Hierarchy

Plan the Device Group Hierarchy.
Decide the device group levels, and which firewalls and virtual systems you will assign to each device group and the Shared location. You can assign any one firewall or virtual system (vsys) to only one device group. If a device group will be just an organizational container for lower level device groups, you don’t need to assign firewalls to it.
Remove firewall or vsys assignments from existing device groups if those assignments don’t fit your planned hierarchy.
Select
Panorama
Device Groups
and select the device group.
In the Devices section, clear the check boxes of firewalls and virtual systems you want to remove, and click
OK
.
If necessary, add more firewalls that you will assign to device groups: see Add a Firewall as a Managed Device.
For each top-level device group, Add a Device Group.
In the
Panorama
Device Groups
page, click
Add
and enter a
Name
to identify the device group.
In the Devices section, select check boxes to assign firewalls and virtual systems to the device group.
Leave the
Parent Device Group
option at
Shared
(the default) and click
OK
.
For each lower-level device group, Add a Device Group.
For new device groups at each lower level, repeat the previous step, but set the
Parent Device Group
to a device group at the next level above.
For each existing device group, in the
Device Groups
page, select the device group to edit it, select a
Parent Device Group
, and click
OK
.
If you move a device group to a different parent, all its descendant device groups move with it, along with all firewalls, policy rules, and objects associated with the device group and its descendants. If the new parent is in another access domain, the moved device group will no longer have membership in the original access domain. If the new access domain has read-write access for the parent device group, it will also have read-write access for the moved device group. If the new access domain has read-only access for the parent, it will have no access for the moved device group. To reconfigure access for device groups, see Configure an Access Domain.
Configure, move, and clone objects and policy rules as needed to account for inheritance in the device group hierarchy.
Create Objects for Use in Shared or Device Group Policy, or edit existing objects.
You can edit objects only at their location: the device group to which they are assigned. Descendant device groups inherit read-only instances of the objects from that location. However, you can optionally see Step Override inherited object values.
Create or edit policies.
Move or Clone a Policy Rule or Object to a Different Device Group.
Override inherited object values.
Applicable only if object values in a particular device group must differ from the values inherited from an ancestor device group.
After overriding an object, you can override it again in descendant device groups. However, you can never override shared or predefined (default) objects.
In the
Objects
tab, inherited objects have a green icon in the Name column, and the Location column displays the ancestor device group.
In the
Objects
tab, select the object type (for example,
Objects
Addresses
).
Select the
Device Group
that will have the override instance.
Select the object and click
Override
.
Edit the values. You can’t edit the
Name
or
Shared
settings.
Click
OK
. The Name column displays a yellow-overlapping-green icon for the object to indicate it is overridden.
If necessary, you can later Revert to Inherited Object Values.
Save and commit your changes.
Commit to Panorama and push to device groups after any change to the hierarchy.
You must also push changes to templates if a template references objects in a device group (such as interfaces referencing addresses), and a firewall assigned to the template is no longer assigned to that device group because of a hierarchy change.
Select
Commit
Commit and Push
and then
Commit and Push
your changes to the Panorama configuration and to the device groups you added or changed.