Add a Virtual Disk to Panorama on Google Cloud Platform

Add a virtual logging disk to Panorama™ in Panorama or Log Collector mode on Google Cloud Platform.
After you Install Panorama on Google Cloud Platform, add virtual logging disks to the Panorama™ virtual appliance instance to provide storage for logs generated by managed firewalls. You can add virtual disks to a local log Collector for a Panorama virtual appliance in Panorama mode or for a Dedicated Log Collector. The Panorama virtual appliance on Google Cloud Platform supports only 2TB logging disks and, in total, supports up to 24TB of log storage. You cannot add a logging disk smaller than 2TB or a logging disk of a size that is not evenly divisible by 2TB because the Panorama virtual appliance partitions logging disks in to 2TB partitions. For example, if you attach a 4TB logging disk, Panorama will create two 2TB partitions. However, you cannot add a 5TB logging disk because the leftover 1TB is not supported as a partition.
  1. Log in to the Google Cloud Console.
  2. Add the virtual logging disk.
    1. In the Products & Services menu, select and then Edit the Panorama virtual appliance instance (Compute EngineVM Instances).
    2. In the Additional Disks section, Add Item.
    3. Create disk (Name drop-down).
  3. Configure the virtual logging disks.
    1. Enter the Name.
    2. Expand the Disk Type drop-down menu and select the desired type.
    3. For the Source type, select None (blank disk).
    4. Set the Size (GB) of the virtual logging disk.
    5. Click Create.
      gcp-config-disk2.png
    6. Save the changes to update the Panorama virtual appliance instance.
  4. Configure each disk.
    The following example uses the sdc virtual disk.
    1. Log in to the Panorama CLI.
    2. Enter the following command to view the disks on the Panorama virtual appliance:
      show system disk details
      The user will see the following response:
      	Name
      : sdb 
      	State : Present 
      	Size : 2048 MB 
      	Status : Available 
      	Reason : Admin enabled 
      	Name : sdc 
      	State : Present 
      	Size : 2048 MB 
      	Status : Available 
      	Reason : Admin disabled
    3. Enter the following command and confirm the request when prompted for all disks with the Reason : Admin disabled response:
      request system disk add sdc
      The request system disk add command is not available on a Panorama management server in Management Only mode because logging is not supported in this mode. If you do not see the command, Set up a Panorama Virtual Appliance in Panorama Mode to enable the logging disks. Once in Panorama mode, Log in to the Panorama CLI and continue to Step 4 to verify the disk addition.
    4. Enter the show system disk details command to verify the status of the disk addition. Continue to the next step when all newly added disk responses display Reason : Admin enabled.
  5. Make disks available for logging.
    1. Log in to the Panorama web interface.
    2. Edit a Log Collector (PanoramaManaged Collectors).
    3. Select Disks and Add each newly added disk.
    4. Click OK.
    5. Select CommitCommit and Push and Commit and Push your changes.
  6. (New Panorama deployments in Panorama mode only) Configure Panorama to receive logs.
    If you are adding logging disks to an existing Panorama virtual appliance, skip to Step 7.
    1. Configure a Managed Collector.
    2. Configure a Collector Group.
    3. Configure Log Forwarding to Panorama.
  7. Verify that the Panorama Log Storage capacity is increased.
    1. Log in to the Panorama web interface.
    2. Select the Collector Group to which the Panorama virtual appliance belongs (PanoramaCollector Groups).
    3. Verify that the Log Storage capacity accurately displays the disk capacity.

Related Documentation