Add a Virtual Disk to Panorama on Hyper-V
Add a virtual logging disk to Panorama™ in Panorama or Log Collector mode on Hyper-V.
After you Install Panorama on Hyper-V, add virtual logging disks to the Panorama™ virtual appliance instance to provide storage for logs generated by managed firewalls. You can add virtual disks to a local log Collector for a Panorama virtual appliance in Panorama mode or for a Dedicated Log Collector. The Panorama virtual appliance on Hyper-V supports only 2TB logging disks and, in total, supports up to 24TB of log storage. You cannot add a logging disk smaller than 2TB or a logging disk of a size that is not evenly divisible by 2TB because the Panorama virtual appliance partitions logging disks in to 2TB partitions. For example, if you attach a 4TB logging disk, Panorama will create two 2TB partitions. However, you cannot add a 5TB logging disk because the leftover 1TB is not supported as a partition.
- Power off the Panorama virtual appliance.
- On the Hyper-V Manager, select the Panorama virtual appliance instance from the list ofVirtual Machines.
- Selectto power off the Panorama virtual appliance.ActionTurn Off
- Add the virtual logging disk. Repeat this step as many times as needed.In all modes, the first logging disk on the Panorama VM must be at least 2TB in order to add additional disks. If the first logging disk is smaller than 2TB, you will be unable to add additional disk space.
- Select the Panorama virtual appliance from the list ofVirtual Machines, and select.ActionSettings
- In theHardwarelist, selectIDE Controller 0.
- From theIDE Controllerdrives list, selectHard DriveandAddthe new virtual logging disk.
- Select the newHard Drivecreated underIDE Controller 0.
- UnderMedia, add aNewhard disk.
- Configure the new virtual logging disk.
- If you see the Before You Begin prompt, clickNextto begin adding the virtual logging disk
- For the Disk Format, selectVHDX. ClickNextto continue
- For the Disk Type, selectFixed SizeorDynamically Expandingbased on your needs. ClickNextto continue.
- Specify theNameandLocationfor the virtual logging disk file. ClickNextto continue.
- To configure the disk, selectCreate a new virtual hard diskand enter the disk size. ClickNextto continue.
- Review the Summary andFinishadding the virtual hard logging disk.
- Applythe new hard disk addition.
- Power on the Panorama virtual appliance.
- Select the Panorama virtual appliance instance from the list ofVirtual Machines.
- Selectto power on the Panorama virtual appliance.ActionStart
- Configure each disk.The following example uses the sdc virtual disk.
- Enter the following command to view the disks on the Panorama virtual appliance:show system disk detailsThe user will see the following response:Name : sdb State : Present Size : 2048 MB Status : Available Reason : Admin enabled Name : sdc State : Present Size : 2048 MB Status : Available Reason : Admin disabled
- Enter the following command and confirm the request when prompted for all disks with theReason : Admindisabledresponse:request system disk add sdcTherequestsystem disk addcommand is not available on a Panorama management server in Management Only mode because logging is not supported in this mode. If you do not see the command, Set up a Panorama Virtual Appliance in Panorama Mode to enable the logging disks. Once in Panorama mode, Log in to the Panorama CLI and continue to Step 4 to verify the disk addition.
- Enter theshow system disk detailscommand to verify the status of the disk addition. Continue to the next step when all newly added disk responses displayReason : Adminenabled.
- Make disks available for logging.
- Log in to the Panorama web interface.
- Edit a Log Collector ().PanoramaManaged Collectors
- SelectDisksandAddeach newly added disk.
- Select.CommitCommit to PanoramaFor Panorama in an Active/Passive high availability (HA) configuration, wait for HA sync to complete before continuing.
- Selectand push the changes to the Collector Group the Log Collector belongs to.CommitPush to Devices
- Verify that the Panorama Log Storage capacity is increased.
- Log in to the Panorama web interface.
- Select the Collector Group to which the Panorama virtual appliance belongs ().PanoramaCollector Groups
- Verify that theLog Storagecapacity accurately displays the disk capacity.
Recommended For You
Recommended videos not found.