: Push the Panorama Node Configuration to Managed Firewalls
Focus
Focus

Push the Panorama Node Configuration to Managed Firewalls

Table of Contents

Push the Panorama Node Configuration to Managed Firewalls

Push template stack and device group configuration from the Panorama™ Node to managed devices.
Once you Synchronize the Panorama Node with the Panorama Controller, template stack and device group configurations, push the template stack and device group configuration to the managed devices.
If you want to make targeted device group configuration change for specific firewalls managed by a Panorama Node, specify the
Devices
in the child device group and not the parent device group in the device group hierarchy. This is required to push device group configurations to specific firewalls managed by a Panorama node.
  1. Log in to the Panorama web interface of the Panorama Controller.
  2. Select
    Panorama
    Interconnect
    Devices
    .
  3. Push to Devices
    to push the synchronized configuration from the Panorama Nodes to the managed devices.
  4. Add
    the Panorama Node managing the devices to push the configuration to. Repeat this step to push to multiple Panorama Nodes, devices groups, or templates as needed:
    1. Select the
      Panorama
      Node.
    2. Select the
      Device Group
      to push both the device group and template stack configurations, or select a
      Template Stack
      to only push the template stack configuration.
    3. Click
      OK
      to finish defining the push scope.
  5. Click
    OK
    to push the configuration to managed devices.
  6. In the Device Group Push Status column, and the Template Stack Push Status column, verify that the pushes are
    in-sync
    .

Recommended For You