Panorama Interconnect Administrator’s Guide
    : Add a Firewall to a Panorama Node
    Focus
    Download PDF
    Focus
    1. Home
    2. Panorama
    3. Panorama Interconnect Administrator’s Guide
    4. Manage Firewalls with Panorama Interconnect
    5. Add a Firewall to a Panorama Node
    Download PDF

    Panorama Interconnect Administrator’s Guide

    Add a Firewall to a Panorama Node

    Table of Contents

    Add a Firewall to a Panorama Node

    Add a single firewall to be managed by a Panorama™ Node on Panorama Interconnect.
    Add a single firewall to be managed by a Panorama™ Node in order to manage the template stack and device group configuration from a centralized Panorama Controller. To bulk import multiple firewalls, see Import Multiple Firewalls to a Panorama Node.
    If your Panorama and managed firewalls are running PAN-OS 10.1 or later release, you must also create and add the device registration authentication key. See the Administrator’s Guide for the Panorama Interconnect plugin version 1.1 for more information.
    1. Configure the firewall to communicate with the Panorama Node.
      1. Perform initial configuration on the firewall so that it is accessible and can communicate with Panorama over the network.
      2. Add the Panorama Node IP address to the firewall.
        1. Select
          Device
          Setup
          Management
           and edit the Panorama Settings.
        2. Enter the Panorama IP address in the first field.
        3. (
          Optional
          ) If you have set up a High Availability pair in Panorama, enter the IP address of the secondary Panorama in the second field.
        4. Click
          OK
          .
      3. Select
        Commit
         and
        Commit
         your changes.
    2. Log in to the Panorama web interface of the Panorama Controller.
    3. Select
      Panorama
      Interconnect
      Devices
       and
      Add
       the firewall.
    4. Enter the firewall information:
      • Enter the
        Serial No
         of the firewall.
      • Select the
        Panorama
         Node to manage the firewall.
      • Select the
        Template Stack
         with which to manage the firewall configuration.
      • Select the
        Device Group
         with which to associate the firewall.
    5. Click
      OK
       to add the firewall as a managed device.
    6. Click
      Commit
       and
      Commit to Panorama
       to finish adding the firewall.
    7. Select
      Panorama
      Interconnect
      Panorama Nodes
       and
      Synchronize Config
      .
    8. Verify that the newly added firewall is
      Connected
      .
      1. Select
        Panorama
        Interconnect
        Devices
        .
      2. Find the firewall you added, and verify that the Connection Status column displays
        Connected
        .

    Recommended For You

    © 2024 Palo Alto Networks, Inc. All rights reserved.