Known Issues in Panorama Plugin for VMware NSX 2.0.1

Th following list describes known issues in the Panorama plugin for VMware NSX 2.0.1.

PAN-91111

The template status under
Panorama
Managed Devices
Summary
Template
is blank for newly deployed firewalls in NSX after upgrading to Panorama 8.1.0. Although the template status is blank, the template configuration is successfully pushed to the firewall.
Workaround:
Adding new configuration to the template followed by a commit-and-push updates the template stats to In Sync.

PAN-88091

When a zone is configured in a template stack for use with VMware NSX, that zone is not pushed.
Workaround:
Create zones as a part of template instead of a template stack.

PLUG-361

You cannot downgrade directly from 8.1.x to 8.0.x when VMware NSX plugin 2.0.x is installed.
Workaround:
Downgrade from 8.1.0 to 8.0.5, install a plugin version 1.0.x, and then downgrade to 8.0.0.

PLUG-248

After a Panorama HA failover, the Panorama plugin for VMware NSX goes out of sync with connected NSX Managers and does not recover after manual NSX configuration syncs.

PLUG-241

When you delete a steering rule on NSX Manager, the plugin in status becomes out of sync for that NSX Manager on Panorama. Executing an NSX Config Sync does not push the rule change.
Workaround:
Log in to Panorama and select
Panorama
VMware NSX
Service Managers
and click
NSX Config-Sync
to perform a second NSX configuration sync.

Recommended For You