Known Issues in VM-Series Plugin 1.0.9

The following list describes known issues in the VM-Series Plugin 1.0.9.

PLUG-4501

On Azure, Active/Passive HA configurations that use a floating IP address sometimes experience loss of traffic after failover.
Upon failover, Azure starts moving the floating IP address from the primary to the secondary. If the HA pair is restored and control returns to the primary before the IP address moves to the secondary, traffic is lost.
Workaround
:
To restore traffic, you must temporarily suspend the primary so that the secondary (which has the floating IP address) is active.
This issue is fixed in VM-Series plugin version 1.0.12.

PLUG-4394

On Azure, Active/Passive HA configurations that use a floating IP address sometimes experience loss of traffic after failover.
Upon failover, Azure starts moving the floating IP address from the primary to the secondary. If the HA pair is restored and control returns to the primary before the IP address moves to the secondary, traffic is lost.
Workaround
:
To restore traffic, you must temporarily suspend the primary so that the secondary (which has the floating IP address) is active.
This issue is fixed in VM-Series plugin version 1.0.12.

PLUG-3509

HA behavior is inconsistent for VM-Series firewalls deployed on Azure.
This issue is fixed in VM-Series plugin version 1.0.12.

PLUG-3562

In OCI, if you assign secondary IP addresses to HA interfaces, those IP addresses are incorrectly moved to the passive HA peer in the event of a failover.

PLUG-3650

HA behavior is inconsistent for VM-Series firewalls deployed on Azure.
This issue is fixed in VM-Series plugin version 1.0.12.

PLUG-3643

On Azure and GCP, the VM-Series firewall boots in maintenance mode when jumbo packet mode is enabled. This issue occurred if you deploy the VM-100 on an instance with 8CPUs/16GB of memory or greater or the VM-300 on an instance with 16CPUs/56GB of memory or greater.
This issue is fixed in VM-Series plugin 1.0.11

PLUG-3743

The VM-Series plugin cannot collect Google Stackdriver metrics for the VM-Series firewall on GCP.
This issue is fixed in VM-Series plugin 1.0.11
With this fix, the VM-Series firewall can publish PAN-OS metrics to Google Stackdriver.

PLUG-3721

On VM-Series firewalls deployed using a flexible Pay-As-You-Go (PAYG) license, the
Dashboard
and under
Device
Licenses
in the web interface or using
request license info
in the CLI displays the capacity license as VM-300 regardless of the capacity license applied.
Workaround
: Execute the command
show system info
to verify the capacity license applied to your VM-Series firewall.

Recommended For You