LQM Support for Prisma Access VPNs
Focus
Focus
Prisma SD-WAN

LQM Support for Prisma Access VPNs

Table of Contents

LQM Support for Prisma Access VPNs

Learn to enable and manage LQM for Prisma Access VPNs.
Where Can I Use This?What Do I Need?
  • Strata Cloud Manager
  • Prisma SD-WAN
    • Prisma SD-WAN license
    • Prisma SD-WAN AppFabric deployed at one or more locations.
    • Physical and/or virtual ION devices running software versions 5.6.X or higher.
  • Prisma Access Cloud Managed
    • Prisma Access with Aggregate Bandwidth; the bandwidth licensing mode must be enabled per compute location on the Prisma Access Cloud Managed portal.
    • Identification of the IPSec Termination Nodes within Prisma Access for connectivity.
  • Ensure that you have Prisma Access (Cloud Managed) and Prisma SD-WAN in the same TSG.
Link Quality Metrics provides the capability to monitor Prisma Access circuit connectivity health through the Link Quality Monitoring (LQM) metrics on the web interface. When a service endpoint is created using native integration, it's automatically set to Prisma Access Remote Networks High Performance (RN-HP).
To enable LQM for Prisma Access tunnels (enabled by default):
  1. Select ManagePrisma SD-WANResourcesService & DC GroupsManage Endpoints.
  2. On the Endpoints screen, select Standard VPN from the drop-down.
  3. From the Settings ellipsis menu, select Liveliness Probe for an endpoint.
  4. On the Liveliness Probe dialog, enable Prisma Access RN-HP LQM for the endpoint.

Leverage Prisma Access LQM for All Non-Hub Paths

By default, Use LQM for Non Hub Paths is disabled but can be enabled at the circuit or circuit category.
  1. Navigate to ManageSitesConfigurationsInternet CircuitsChange Circuits, and select a site from the list of sites.
  2. Edit the specific circuit.
  3. On the Circuit Information page, under LQM Hubs, select Prisma Access.
    Refer to Configure Internet Circuits for more information.