Prisma SD-WAN
Bind Security Zones to Interfaces
Table of Contents
Bind Security Zones to Interfaces
Learn how to bind security zones to interfaces.
| Where Can I Use This? | What Do I Need? |
|---|---|
|
|
If
a site has both site-level bindings and device-level bindings, the
two settings’ resulting configuration is united. In the event of
a conflict between site-level bindings and device-level bindings,
device-level bindings take precedence.
You can bind
security zones to device interfaces either by selecting a security
zone first and then binding it to a device interface or you can
select the device interface first and then select a security zone
for binding.
- Select a security zone and bind it to a device interface(s).
- Select , and select a Security Zone.From the ellipsis menu for a security zone, select View Interface Bindings.Click Element.Click Bind New Element.Select an ION device and click Submit.On the Element Zone Binding screen, select an interface(s) to bind to the zone.Click Save.Select a device from a site and bind a security zone to a device interface(s).
- Select .Select a site and go to .Select Devices and click Bind Zone.Select a zone to bind and then click Done.On the Zone Networks Binding for Zone screen, select an interface(s) to bind to the zone.Click Save.
Related CLIs
- inspect policy manager status
- inspect policy mix lookup flow
- inspect priority policy conflicts
- inspect priority policy dropped
- inspect priority policy hits default rule dscp
- inspect priority policy hits policy rules
- inspect priority policy lookup
- inspect security policy lookup
- inspect security policy size
- dump priority policy config policy rules
- dump priority policy config policy sets
- dump priority policy config policy stacks
- dump priority policy config prefix filters
- dump security policy config policy rules
- dump security policy config policy set
- dump security policy config policy set stack
- dump security policy config prefix filters
- dump security policy config zones
