dump spoke-ha failover-timeline
Use the dump spoke-ha failover-timeline command to displays a
chronological record of High Availability (HA) events. Use this command to measure
failover convergence time and identify bottlenecks when a branch device transitions from
standby to active in an branch HA configuration.
This timeline reflects the status of the primary WAN instance, including the first WAN
interface IP address, route, and Prisma SD-WAN Secure Fabric Link.
- Became Active: The time the system or device transitioned to the active role in the
HA pair.
- Interface and GARP: The time the system programmed the first WAN interface and sent
a Gratuitous ARP (GARP) on the LAN side to attract traffic.
- Routes programmed: The time the system installed routes for the first WAN interface
in the route table.
- Traffic start: The time the device became ready to forward traffic.
- Prisma SD-WAN Secure Fabric Link up: The time the system established the first
Prisma SD-WAN Secure Fabric Link tunnel.
The timeline displays all timestamps using US date annotation
and a 12-hour clock (for example: 2026-02-24 16:01:48.827).
Command
dump spoke-ha failover-timeline
Command Notes
| Role | Super, Read Only, Monitor |
| Related Commands | — |
| Introduced in | Release 6.6.1 |
Example
dump spoke-ha failover-timeline
--------------------------------------------------
HA STAGE TIME
--------------------------------------------------
Became Active 2026-02-16 16:01:48.827
Interface and GARP 2026-02-16 16:01:50.106
Routes programmed 2026-02-16 16:01:50.695
Traffic start 2026-02-16 16:01:50.775
VPN up 2026-02-16 16:01:54.951
