Focus

Change the Guaranteed Bandwidth For Remote Networks

Table of Contents

Filter

Expand All | Collapse All

Prisma Access Docs

Activation & Onboarding
Administration
Version
- Prisma Access China
- 4.0 & Later
- 3.2 Preferred and Innovation
- 3.1 Preferred and Innovation
- 3.0 Preferred and Innovation
- 2.2 Preferred
Integrations
Incidents & Alerts
Release Notes
Version
- 5.2 Preferred and Innovation
- 5.1 Preferred and Innovation
- 5.0 Preferred and Innovation
- 4.2 Preferred
- 4.1 Preferred
- 4.0 Preferred
- 3.2 Preferred and Innovation
- 3.1 Preferred and Innovation
- 3.0 Preferred and Innovation
- 2.2 Preferred

IPSec Termination Nodes, Bandwidth Allocation, and Guaranteed Bandwidth

Select QoS Profiles for Remote Networks

Change the Guaranteed Bandwidth For Remote Networks

If you have multiple remote network locations that are associated to one IPSec termination node, you can change the guaranteed bandwidth for each site. In the following example, you want the Canada East location to receive more bandwidth then the Canada Central location; to do so, complete the following steps.

Select PanoramaCloud ServicesConfigurationRemote NetworksSettings.
Click the gear to edit the settings and select QoS.
Enable QoS, assign a QoS Profile (Default-Profile in this example) and a Guaranteed Bandwidth Ratio to the Canada Central compute location.
Select Customize Per Site, enable Customize Per Site, then apply a higher bandwidth Allocation Ratio for the RN-8 remote network (for the Canada East location) than the RN-9 remote network (for the Canada Central location).
The following example shows an Allocation Ratio of 70% for RN-8 and 30% for RN-9. The Guaranteed Bandwidth (Mbps) changes accordingly, showing the new guaranteed bandwidth amounts.

When complete, your configuration has the following guaranteed bandwidth allocation for the two sites.

If you have a remote network that has ECMP enabled to use multiple IPSec tunnels for a single remote network, you can change the Allocation Ratio for the IPSec tunnels you use for that remote network location.
Save and Commit your changes.
The guaranteed bandwidth values display in the PanoramaCloud ServicesStatusMonitorRemote Networks area, in the Guaranteed Mbps area. If you did not specify a bandwidth, it displays as 0.