Create a Service Connection to Enable Access between Mobile
Users and Remote Networks
We recommend always creating a service connection, even
if you don’t need to access resources at your organization’s HQ
or data center. You must configure a service connection to allow
network communication between mobile users and remote network locations
and between mobile users in different geographical locations.
recommend creating this type of service connection for the following
Your deployment includes both remote
networks and mobile users and you do not already have a service
You have mobile users in different geographical areas who
need direct access to each other’s endpoints.
You have already configured a service connection, but the
existing service connection is not in an ideal location between
the remote networks and mobile users.
All remote network locations
communicate to each other in a mesh network. Mobile users connect
to remote networks using the service connection in a hub-and-spoke
network. In some cases, it might improve network efficiency to place
another service connection closer to the remote network or networks that
the mobile users most frequently access.
a service connection to connect mobile users and remote networks,
Prisma Access doesn’t route any traffic through this tunnel, any value
that does not conflict or overlap with other configured subnets
The following example shows a Prisma Access
deployment with mobile users in different geographical areas and
remote networks. The remote network connections are connected in
a mesh network in the Prisma Access infrastructure, but the mobile users
cannot connect to the remote networks. In addition, the mobile users
in different geographic areas cannot connect to each other without
a service connection.
you add a service connection, the service connection connects the
mobile users and the remote networks in a hub-and-spoke network.
case where a service connection of this type is useful is when the service
connection is far from the mobile users. The following figure shows
an example of this network deployment.
a second service connection that is closer to the mobile users creates
a more efficient network between the mobile users and remote networks.