>
    Onboard Remote Networks with Configuration Import
    Focus
    Download PDF
    Focus
    1. Home
    2. Prisma
    3. Prisma Access
    4. Use Remote Networks to Secure Branches
    5. Quick Configs for Remote Network Deployments
    6. Onboard Remote Networks with Configuration Import
    Download PDF

    Onboard Remote Networks with Configuration Import

    Table of Contents

    Onboard Remote Networks with Configuration Import

    Use the bulk import capability to speed up the process of onboarding remote networks
    To streamline the process to Onboard and Configure Remote Networks, you have the option to onboard at least one remote network and then export those settings to a Comma Separated Value (CSV) text file. The CSV file includes the values of IPSec tunnel and IKE gateway settings for the network you selected for export, and you can then edit these settings and make them unique for each new network you may want to onboard. You can modify the CSV file to include 1000 new remote networks and then import the CSV file back to speed up the process of onboarding new remote network locations.
    The CSV file does not include keys or passwords, such as the BGP shared secret, the IKE preshared key, Proxy ID, IKE crypto profile, IPSec crypto profile. Therefore, any keys and passwords required for the IPSec tunnel and IKE gateway settings are inherited from the network you select when you initiate the CSV file import.
    When using this bulk import process, you must wait for Prisma Access to deploy the infrastructure for securing these locations.
    1. Select
      Panorama
      Cloud Services
      Configuration
      Remote Networks
       (in the Onboarding section).
    2. Select a location, then
      Export
       the configuration of a remote network that you have previously onboarded.
      If you have not yet added any locations, you need to
      Add
       a location, then download its configuration. You must select a remote network and click
      Export
      . A CSV file that includes the settings is downloaded to your computer.
    3. (
      Deployments that allocate bandwidth by compute location only
      ) Make sure that you have allocated bandwidth for the locations to onboard.
      Each location you onboard has a corresponding compute location for which bandwidth is allocated.
      1. Select
        Panorama
        Cloud Services
        Configuration
        Remote Networks
         and click the gear in the
        Bandwidth Allocation
         area.
      2. Check the
        Bandwidth Allocation
         field in the table that displays.
        The table in this area shows the compute location-to-Prisma Access location mapping. You must have bandwidth allocated for the compute locations that are associated with the locations you want to onboard. For example, to onboard the Japan Central location, make sure that you have allocated bandwidth in the Asia Northeast compute location.
      3. If you have not yet allocated bandwidth for the compute locations that are associated with the locations you want to onboard, add it now.
    4. (
      Deployments that allocate bandwidth by compute location only
      ) Find the
      IPSec Termination Node
       associated with the location or locations you want to onboard.
      You assign an
      IPSec Termination Node
       to the remote network during onboarding, and you enter this value in the
      spn-name
       column of the CSV file. Each IPSec termination node is equal to 500 Mbps of bandwidth. See Plan to Deploy Remote Networks for details.
      To find the IPSec Termination Node, perform one of the following actions:
      • Select
        Panorama
        Cloud Services
        Configuration
        Remote Networks
        ,
        Add
         a remote network and select the location you want to onboard, and make a note of the IPSec Termination Node choices in the onboarding area.
      • Open a command-line interface (CLI) session with the Panorama that manages Prisma Access and enter the
        show plugins cloud_services remote-networks agg-bandwidth region
        compute-location-name
        , where
        compute-location-name
         is the compute location that is associated with the location you want to onboard. The IPSec Termination Node displays in the
        spn-name-list
         field.
    5. Modify the CSV file to add configuration for remote networks.
      See Fields in the Remote Networks Table for a description of the fields and the possible values in this file.
      You must rename the network(s) listed in the exported file. If the file has duplicate names the import will fail.
    6. Import
       the CSV file.
      The configuration from the file are displayed on screen. The remote network you selected to import the file will serve as a model configuration, and the remote networks listed in the file will inherit the keys and any missing values that do not have to be unique from there.
    7. Commit and push your changes.
      1. Commit
        Commit and Push
         your changes.
      2. Click
        OK
         and
        Push
        .

    Fields in the Remote Networks Table

    The following table provides a description of the fields in the remote networks table. Fields marked as
    Y
     in the
    Required
     row are required fields and fields marked as
    N
     are optional.
    Field
    Description
    Required?(Y/N)
    name
    The name of the remote network.
    Y
    bandwidth
    (
    Deployments that allocate bandwidth by location only
    ) The allocated bandwidth of the remote network. Acceptable values are:
    • 2 Mbps
    • 5 Mbps
    • 10 Mbps
    • 20 Mbps
    • 25 Mbps
    • 50 Mbps
    • 100 Mbps
    • 150 Mbps
    • 300 Mbps
    • 500 Mbps
    • 1000 Mbps
    The 1000 Mbps bandwidth option is in preview mode. The throughput during preview is delivered on a best-effort basis and the actual performance will vary depending upon the traffic mix.
    Y
    region
    The remote network’s location. See the list of Prisma Access locations for the values to enter.
    Enter the locations exactly as they are in this document (for example,
    US West
    , or
    Japan South
    ).
    Y
    subnets
    Statically routed subnets on the LAN side of the remote network. Separate multiple subnets with commas.
    N
    bgp_peer_as
    The BGP Autonomous System Number (ASN) of the remote network peer device.
    N
    bgp_peer_address
    The BGP peer address of the remote network peer device.
    N
    tunnel_name
    The name of the IPSec tunnel configuration. A unique value is required.
    Y
    gateway_name
    The name of the IKE Gateway configuration. A unique value is required.
    Y
    peer_ip_address
    The IP address of the Prisma Access peer device.
    N
    local_id_type
    The type of IKE ID that Prisma Access presents to the peer device. If you use certificates in the remote network to which you import this file, all imported types specified will refer to the Configured Certificate values.
    N
    local_id_value
    The value of the IKE ID that Prisma Access presents to the peer device. If you use certificates in the remote network to which you import this file, all imported types specified will refer to the Configured Certificate values.
    N
    peer_id_type
    The value of the IKE ID that the peer presents to Prisma Access. If you use certificates in the remote network to which you import this file, all imported types specified will refer to the Peer Certificate values.
    N
    peer_id_value
    The value of the IKE ID that Prisma Access presents to the peer device. If you use certificates in the remote network to which you import this file, all imported types specified will refer to the Peer Certificate values.
    N
    monitor_ip
    The tunnel monitoring IP address the cloud will use to determine that the IPSec tunnel is up and the peer network is reachable.
    You cannot export a proxy-ID value for the tunnel monitor.
    N
    proxy_ids
    The proxy IDs that are configured for the peer. For route-based VPNs, leave this field blank. Specify the Proxy ID in the following CSV configuration format:
    [{"
    name
    ":"
    proxyidname
    ", "
    local
    ":"
    1.2.3.4/32
    ", "
    remote
    ":"
    4.3.2.1/32
    ", "
    protocol
    ":{"
    udp
    ": {"
    local-port
    ":
    123
    , "
    remote-port
    ":
    234
    }}}, {"
    name
    ":"
    proxyidname2
    ", "
    local
    ":"
    2.3.4.5/32
    ", "
    remote
    ":"
    3.4.5.6/32
    ", "
    protocol
    ":{"
    tcp
    ": {"
    local-port
    ":
    234
    ,"
    remote-port
    ":
    345
    }}}]
    N
    sec_wan_enabled
    Specifies whether or not you enable a secondary IPSec tunnel. Acceptable values are
    yes
     and
    no
    .
    N
    sec_tunnel_name
    The name of the secondary IPSec tunnel configuration. A unique value is required if you specify a secondary tunnel.
    N
    sec_gateway_name
    The name of the secondary IKE Gateway configuration. A unique value is required if you specify a secondary tunnel.
    N
    sec_peer_ip_address
    The IP address of the Prisma Access peer device for the secondary IPSec tunnel.
    N
    sec_local_id_type
    The type of IKE ID that Prisma Access presents to the peer device for the secondary IPSec tunnel. If you use certificates in the remote network to which you import this file, all imported types specified will refer to the Configured Certificate values.
    N
    sec_local_id_value
    The value of the IKE ID that Prisma Access presents to the peer device for the secondary IPSec tunnel. If you use certificates in the remote network to which you import this file, all imported types specified will refer to the Configured Certificate values.
    N
    sec_peer_id_type
    The value of the IKE ID that the peer presents to Prisma Access for the secondary IPSec tunnel. If you use certificates in the remote network to which you import this file, all imported types specified will refer to the Peer Certificate values.
    N
    sec_peer_id_value
    The value of the IKE ID that Prisma Access presents to the peer device for the secondary IPSec tunnel. If you use certificates in the remote network to which you import this file, all imported types specified will refer to the Peer Certificate values.
    N
    sec_monitor_ip
    The tunnel monitoring IP address the cloud will use for the secondary IPSec tunnel to determine that the IPSec tunnel is up and the peer network is reachable.
    You cannot export a proxy-ID value for the tunnel monitor.
    N
    sec_proxy_ids
    The proxy IDs that are configured for the peer for the secondary IPSec tunnel. For route-based VPNs, leave this field blank. Specify the Proxy ID in the following CSV configuration format:
    [{"
    name
    ":"
    proxyidname
    ", "
    local
    ":"
    1.2.3.4/32
    ", "
    remote
    ":"
    4.3.2.1/32
    ", "
    protocol
    ":{"
    udp
    ": {"
    local-port
    ":
    123
    , "
    remote-port
    ":
    234
    }}}, {"
    name
    ":"
    proxyidname2
    ", "
    local
    ":"
    2.3.4.5/32
    ", "
    remote
    ":"
    3.4.5.6/32
    ", "
    protocol
    ":{"
    tcp
    ": {"
    local-port
    ":
    234
    ,"
    remote-port
    ":
    345
    }}}]
    N
    ecmp_link_1_tunnel_name
    (
    ECMP deployments only
    ) The name of the IPSec tunnel configuration for ECMP tunnel 1. A unique value is required.
    ecmp_link_1_gateway_name
    (
    ECMP deployments only
    ) The name of the IKE Gateway configuration for ECMP tunnel 1. A unique value is required.
    ecmp_link_1_peer_ip_address
    (
    ECMP deployments only
    ) The IP address of the Prisma Access peer device for ECMP tunnel 1.
    ecmp_link_1_local_id_type
    (
    ECMP deployments only
    ) The type of IKE ID that Prisma Access presents to the peer device for ECMP tunnel 1. If you use certificates in the remote network to which you import this file, all imported types specified will refer to the Configured Certificate values.
    ecmp_link_1_local_id_value
    (
    ECMP deployments only
    ) The value of the IKE ID that Prisma Access presents to the peer device for ECMP tunnel 1. If you use certificates in the remote network to which you import this file, all imported types specified will refer to the Configured Certificate values.
    ecmp_link_1_peer_id_type
    (
    ECMP deployments only
    ) The value of the IKE ID that the peer presents to Prisma Access for ECMP tunnel 1. If you use certificates in the remote network to which you import this file, all imported types specified will refer to the Peer Certificate values.
    ecmp_link_1_peer_id_value
    (
    ECMP deployments only
    ) The value of the IKE ID that Prisma Access presents to the peer device for ECMP tunnel 1. If you use certificates in the remote network to which you import this file, all imported types specified will refer to the Peer Certificate values.
    ecmp_link_1_monitor_ip
    (
    ECMP deployments only
    ) The tunnel monitoring IP address the cloud will use to determine that the IPSec tunnel is up and the peer network is reachable for ECMP tunnel 1.
    You cannot export a proxy-ID value for the tunnel monitor.
    ecmp_link_1_proxy_ids
    (
    ECMP deployments only
    ) The proxy IDs that are configured for the peer for ECMP tunnel 1. For route-based VPNs, leave this field blank. Specify the Proxy ID in the following CSV configuration format:
    [{"
    name
    ":"
    proxyidname
    ", "
    local
    ":"
    1.2.3.4/32
    ", "
    remote
    ":"
    4.3.2.1/32
    ", "
    protocol
    ":{"
    udp
    ": {"
    local-port
    ":
    123
    , "
    remote-port
    ":
    234
    }}}, {"
    name
    ":"
    proxyidname2
    ", "
    local
    ":"
    2.3.4.5/32
    ", "
    remote
    ":"
    3.4.5.6/32
    ", "
    protocol
    ":{"
    tcp
    ": {"
    local-port
    ":
    234
    ,"
    remote-port
    ":
    345
    }}}]
    ecmp_link_1_bgp_peer_as
    (
    ECMP deployments only
    ) The BGP Autonomous System Number (ASN) of the remote network peer device for ECMP tunnel 1.
    ecmp_link_1_bgp_peer_address
    (
    ECMP deployments only
    ) The BGP peer address of the remote network peer device for ECMP tunnel 1.
    ecmp_link_2_tunnel_name
    (
    ECMP deployments only
    ) The name of the IPSec tunnel configuration for ECMP tunnel 2. A unique value is required.
    ecmp_link_2_gateway_name
    (
    ECMP deployments only
    ) The name of the IKE Gateway configuration for ECMP tunnel 2. A unique value is required.
    ecmp_link_2_peer_ip_address
    (
    ECMP deployments only
    ) The IP address of the Prisma Access peer device for ECMP tunnel 2.
    ecmp_link_2_local_id_type
    (
    ECMP deployments only
    ) The type of IKE ID that Prisma Access presents to the peer device for ECMP tunnel 2. If you use certificates in the remote network to which you import this file, all imported types specified will refer to the Configured Certificate values.
    ecmp_link_2_local_id_value
    (
    ECMP deployments only
    ) The value of the IKE ID that Prisma Access presents to the peer device for ECMP tunnel 2. If you use certificates in the remote network to which you import this file, all imported types specified will refer to the Configured Certificate values.
    ecmp_link_2_peer_id_type
    (
    ECMP deployments only
    ) The value of the IKE ID that the peer presents to Prisma Access for ECMP tunnel 2. If you use certificates in the remote network to which you import this file, all imported types specified will refer to the Peer Certificate values.
    ecmp_link_2_peer_id_value
    (
    ECMP deployments only
    ) The value of the IKE ID that Prisma Access presents to the peer device for ECMP tunnel 2. If you use certificates in the remote network to which you import this file, all imported types specified will refer to the Peer Certificate values.
    ecmp_link_2_monitor_ip
    (
    ECMP deployments only
    ) The tunnel monitoring IP address the cloud will use to determine that the IPSec tunnel is up and the peer network is reachable for ECMP tunnel 2.
    You cannot export a proxy-ID value for the tunnel monitor.
    ecmp_link_2_proxy_ids
    (
    ECMP deployments only
    ) The proxy IDs that are configured for the peer for ECMP tunnel 2. For route-based VPNs, leave this field blank. Specify the Proxy ID in the following CSV configuration format:
    [{"
    name
    ":"
    proxyidname
    ", "
    local
    ":"
    1.2.3.4/32
    ", "
    remote
    ":"
    4.3.2.1/32
    ", "
    protocol
    ":{"
    udp
    ": {"
    local-port
    ":
    123
    , "
    remote-port
    ":
    234
    }}}, {"
    name
    ":"
    proxyidname2
    ", "
    local
    ":"
    2.3.4.5/32
    ", "
    remote
    ":"
    3.4.5.6/32
    ", "
    protocol
    ":{"
    tcp
    ": {"
    local-port
    ":
    234
    ,"
    remote-port
    ":
    345
    }}}]
    ecmp_link_2_bgp_peer_as
    (
    ECMP deployments only
    ) The BGP Autonomous System Number (ASN) of the remote network peer device for ECMP tunnel 2.
    ecmp_link_2_bgp_peer_address
    (
    ECMP deployments only
    ) The BGP peer address of the remote network peer device for ECMP tunnel 2.
    ecmp_link_3_tunnel_name
    (
    ECMP deployments only
    ) The name of the IPSec tunnel configuration for ECMP tunnel 3. A unique value is required.
    ecmp_link_3_gateway_name
    (
    ECMP deployments only
    ) The name of the IKE Gateway configuration for ECMP tunnel 3. A unique value is required.
    ecmp_link_3_peer_ip_address
    (
    ECMP deployments only
    ) The IP address of the Prisma Access peer device for ECMP tunnel 3.
    ecmp_link_3_local_id_type
    (
    ECMP deployments only
    ) The type of IKE ID that Prisma Access presents to the peer device for ECMP tunnel 3. If you use certificates in the remote network to which you import this file, all imported types specified will refer to the Configured Certificate values.
    ecmp_link_3_local_id_value
    (
    ECMP deployments only
    ) The value of the IKE ID that Prisma Access presents to the peer device for ECMP tunnel 3. If you use certificates in the remote network to which you import this file, all imported types specified will refer to the Configured Certificate values.
    ecmp_link_3_peer_id_type
    (
    ECMP deployments only
    ) The value of the IKE ID that the peer presents to Prisma Access for ECMP tunnel 3. If you use certificates in the remote network to which you import this file, all imported types specified will refer to the Peer Certificate values.
    ecmp_link_3_peer_id_value
    (
    ECMP deployments only
    ) The value of the IKE ID that Prisma Access presents to the peer device for ECMP tunnel 3. If you use certificates in the remote network to which you import this file, all imported types specified will refer to the Peer Certificate values.
    ecmp_link_3_monitor_ip
    (
    ECMP deployments only
    ) The tunnel monitoring IP address the cloud will use to determine that the IPSec tunnel is up and the peer network is reachable for ECMP tunnel 3.
    You cannot export a proxy-ID value for the tunnel monitor.
    ecmp_link_3_proxy_ids
    (
    ECMP deployments only
    ) The proxy IDs that are configured for the peer for ECMP tunnel 3. For route-based VPNs, leave this field blank. Specify the Proxy ID in the following CSV configuration format:
    [{"
    name
    ":"
    proxyidname
    ", "
    local
    ":"
    1.2.3.4/32
    ", "
    remote
    ":"
    4.3.2.1/32
    ", "
    protocol
    ":{"
    udp
    ": {"
    local-port
    ":
    123
    , "
    remote-port
    ":
    234
    }}}, {"
    name
    ":"
    proxyidname2
    ", "
    local
    ":"
    2.3.4.5/32
    ", "
    remote
    ":"
    3.4.5.6/32
    ", "
    protocol
    ":{"
    tcp
    ": {"
    local-port
    ":
    234
    ,"
    remote-port
    ":
    345
    }}}]
    ecmp_link_3_bgp_peer_as
    (
    ECMP deployments only
    ) The BGP Autonomous System Number (ASN) of the remote network peer device for ECMP tunnel 3.
    ecmp_link_3_bgp_peer_address
    (
    ECMP deployments only
    ) The BGP peer address of the remote network peer device for ECMP tunnel 3.
    ecmp_link_4_tunnel_name
    (
    ECMP deployments only
    ) The name of the IPSec tunnel configuration for ECMP tunnel 4. A unique value is required.
    ecmp_link_4_gateway_name
    (
    ECMP deployments only
    ) The name of the IKE Gateway configuration for ECMP tunnel 4. A unique value is required.
    ecmp_link_4_peer_ip_address
    (
    ECMP deployments only
    ) The IP address of the Prisma Access peer device for ECMP tunnel 4.
    ecmp_link_4_local_id_type
    (
    ECMP deployments only
    ) The type of IKE ID that Prisma Access presents to the peer device for ECMP tunnel 4. If you use certificates in the remote network to which you import this file, all imported types specified will refer to the Configured Certificate values.
    ecmp_link_4_local_id_value
    (
    ECMP deployments only
    ) The value of the IKE ID that Prisma Access presents to the peer device for ECMP tunnel 4. If you use certificates in the remote network to which you import this file, all imported types specified will refer to the Configured Certificate values.
    ecmp_link_4_peer_id_type
    (
    ECMP deployments only
    ) The value of the IKE ID that the peer presents to Prisma Access for ECMP tunnel 4. If you use certificates in the remote network to which you import this file, all imported types specified will refer to the Peer Certificate values.
    ecmp_link_4_peer_id_value
    (
    ECMP deployments only
    ) The value of the IKE ID that Prisma Access presents to the peer device for ECMP tunnel 4. If you use certificates in the remote network to which you import this file, all imported types specified will refer to the Peer Certificate values.
    ecmp_link_4_monitor_ip
    (
    ECMP deployments only
    ) The tunnel monitoring IP address the cloud will use to determine that the IPSec tunnel is up and the peer network is reachable for ECMP tunnel 4.
    You cannot export a proxy-ID value for the tunnel monitor.
    ecmp_link_4_proxy_ids
    (
    ECMP deployments only
    ) The proxy IDs that are configured for the peer for ECMP tunnel 4. For route-based VPNs, leave this field blank. Specify the Proxy ID in the following CSV configuration format:
    [{"
    name
    ":"
    proxyidname
    ", "
    local
    ":"
    1.2.3.4/32
    ", "
    remote
    ":"
    4.3.2.1/32
    ", "
    protocol
    ":{"
    udp
    ": {"
    local-port
    ":
    123
    , "
    remote-port
    ":
    234
    }}}, {"
    name
    ":"
    proxyidname2
    ", "
    local
    ":"
    2.3.4.5/32
    ", "
    remote
    ":"
    3.4.5.6/32
    ", "
    protocol
    ":{"
    tcp
    ": {"
    local-port
    ":
    234
    ,"
    remote-port
    ":
    345
    }}}]
    ecmp_link_4_bgp_peer_as
    (
    ECMP deployments only
    ) The BGP Autonomous System Number (ASN) of the remote network peer device for ECMP tunnel 4.
    ecmp_link_4_bgp_peer_address
    (
    ECMP deployments only
    ) The BGP peer address of the remote network peer device for ECMP tunnel 4.
    spn-name
    (
    Deployments that allocate bandwidth by compute location only
    ) The name of the IPSec Termination Node. This field is required for deployments that allocate bandwidth by compute location.

    Recommended For You

    © 2023 Palo Alto Networks, Inc. All rights reserved.